Fujitsu A6210 A6210 User's Guide - Page 48
Using the Keyboard, Using the Power Options, Closing the Display Panel, perform the following
View all Fujitsu A6210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Using the Keyboard Adjusting the brightness using the keyboard changes the setting only temporarily. • [Fn+F6]: Pressing repeatedly will lower the brightness of your display. • [Fn+F7]: Pressing repeatedly will increase the brightness of the display. Using the Power Options To adjust the brightness so that the setting changes remain after the system is rebooted or resumed, perform the following: 1 Click the Start icon, then select Control Panel. 2 Select Power Options, then click on "Adjust to Display Brightness" in the left pane. 3 Set the desired brightness for the display when it is running on battery and when plugged in. 4 Click [Save changes].. ■ WHEN USING AC POWER YOUR BRIGHTNESS SETTING IS SET TO ITS HIGHEST LEVEL BY DEFAULT. WHEN USING BATTERY POWER YOUR BRIGHTNESS SETTING IS SET TO APPROXIMATELY MID-LEVEL BY DEFAULT. ■ THE HIGHER THE BRIGHTNESS, THE MORE POWER THE NOTEBOOK WILL CONSUME AND THE FASTER YOUR BATTERIES WILL DISCHARGE. FOR MAXIMUM BATTERY LIFE, MAKE SURE THAT THE BRIGHTNESS IS SET AS LOW AS POSSIBLE. Closing the Display Panel 1 Holding the edge of your display panel, pull it forward until it is flush with the body of your LifeBook notebook. 2 Push down until you hear a click. This will engage the locking mechanism and prevent your display panel from opening unexpectedly. 48 - Display Panel