Fujitsu B6230 User Guide - Page 106
Running Recovery and Utility from the disc, BOOT Priority Change
UPC - 611343081986
View all Fujitsu B6230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Running Recovery and Utility from the disc • THE USE OF THIS DISC REQUIRES THAT YOU HAVE A DEVICE CAPABLE OF READING CDS ATTACHED TO YOUR SYSTEM. YOU WILL NEED TO ATTACH AN EXTERNAL PLAYER. FOR MORE INFORMATION ON AVAILABLE EXTERNAL DEVICES, VISIT OUR WEB SITE AT: US.FUJITSU.COM/COMPUTERS. • THIS DISC CAN ONLY BE USED WITH THE SYSTEM WITH WHICH IT WAS PURCHASED. BOOT Priority Change Before restoring an image, you must first verify that the system is set up to boot from the optical drive. To verify/change the boot-up priority (rather than booting-up from the hard drive or an external floppy disk drive), perform the following steps: 1 Power on your system. When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left mouse or touchpad button; the TrustedCore Menu will appear. 2 Select the Boot Menu from the TrustedCore Menu. 3 Highlight the CD/DVD option, then click [OK]. 4 Insert the Recovery and Utility Disc into the drive tray. After you have changed the boot priority, you can restore a backup image when booting up. Procedure for using Recovery and Utility disc 1 Turn on the power to your system. 2 Ensure that you have a device that can read CDs either installed in your system or attached externally to it, and that it has been set up as the Boot device (in accordance with "BOOT Priority Change" on page 101). 3 Insert the Recovery and Utility disc into the drive tray. With the boot priority set in the procedure above, the system will boot from the Recovery and Utility disc. 4 Reboot your system. After the system reboots, the Recovery and Utility screen appears. On the screen are three tabs: Diagnostics, Recovery, and Utility. 101 - Restoring Your Pre-installed Software