Fujitsu E8410 E8410 User's Guide - Page 22
The PC Card Slots allow you to install a Type I or Type II PC Card. See PC Cards/ExpressCards™
UPC - 611343071222
View all Fujitsu E8410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
THE INTERNAL MODEM IS NOT INTENDED FOR USE WITH DIGITAL PBX SYSTEMS. DO NOT CONNECT THE INTERNAL MODEM TO A DIGITAL PBX AS IT MAY CAUSE SERIOUS DAMAGE TO THE INTERNAL MODEM OR YOUR ENTIRE NOTEBOOK. CONSULT YOUR PBX MANUFACTURER'S DOCUMENTATION FOR DETAILS. SOME HOTELS HAVE DIGITAL PBX SYSTEMS. BE SURE TO FIND OUT BEFORE YOU CONNECT YOUR MODEM. THE INTERNAL MULTINATIONAL MODEM IS DESIGNED TO THE ITU-T V.90/V.92 STANDARD. ITS MAXIMUM SPEED OF 53000 BPS IS THE HIGHEST ALLOWED BY FCC, AND ITS ACTUAL CONNECTION RATE DEPENDS ON THE LINE CONDITIONS. THE MAXIMUM SPEED IS 33600 BPS AT UPLOAD, IN ACCORDANCE WITH FCC REGULATIONS. FOR ADDITIONAL INFORMATION ABOUT THE MODEM, REFER TO THE FUJITSU WEBSITE AT: US.FUJITSU.COM/COMPUTERS. IEEE 1394 (4-pin) Jack The 4-pin 1394 jack is used to connect between your notebook and an IEEE 1394 peripheral such as a digital video camera. See "IEEE 1394 Port" on page 95. ExpressCard Slot The ExpressCard slot allows you to install an ExpressCard. See "PC Cards/ExpressCards™" on page 80. ExpressCard Eject Button The ExpressCard eject button is used for removing an ExpressCard from the slot. PC Card Eject Button The PC Card eject button is used for removing a PC Card from the slot. PC Card Slot The PC Card Slots allow you to install a Type I or Type II PC Card. See "PC Cards/ExpressCards™" on page 80. 17 - Getting to Know Your LifeBook