Fujitsu E8420 E8420 BIOS Guides - Page 23
Exiting from the Security Menu, When you have finished setting the parameters on the Security Menu
UPC - 611343084727
View all Fujitsu E8420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Security Menu Table 15: Fields, Options and Defaults for the Security Menu Menu Field Options Default Description Supervisor Password is: User Password is: Set Supervisor Password Set User Password Minimum User Password Length: Password on Boot: On Automatic Wake up: KB Lock on Resume: Boot from Removable Media: Flash Write: Hard Disk Security: Owner Information: TPM (Security Chip) Setting -- Clear -- Clear -- [Enter] -- [Enter] -- ■ Disabled ■ First Boot ■ Every Boot [0] [Disabled] ■ Disabled ■ Enabled ■ Disabled ■ Enabled [Disabled] [Disabled] ■ All [All] ■ Supervisor only ■ Disabled ■ Enabled [Enabled] -- -- -- -- ___ ___ A display-only field. Set is displayed when the system supervisor password is set and Clear when it is not. A display-only field. Set is displayed when the general user password is set, and Clear when it is not. Sets, changes or cancels the Supervisor Password. The Supervisor Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a Supervisor Password is set it must be used to access the BIOS setup utility. This field can only be accessed if the Supervisor Password is set. Sets, changes or cancels the User Password. A User Password may be up to seven characters long and must include only letters or numbers (no symbols). Passwords are NOT case-sensitive. To cancel a password press [Enter] key instead of entering characters in the Enter New Password field and in the Re-enter New Password field. When a User Password is set it must be used to access the BIOS setup utility. Supervisor can set password length (0 to 8) for user password. User cannot set a password shorter than the minimum length. When set to First Boot, a password (User or Supervisor) is required just once after the Power On Self Test (POST) before the operating system will be read from a disk. When set to Every Boot, a password (User or Supervisor) is required every time after the Power On Self Test (POST) before the operating system will be read from a disk. When set to Disabled no password is required. When disabled, password entry is not required when the system wakes up automatically. When enabled, password entry is required upon wake up. When set to Enabled, the PS/2 mouse and keyboard inputs are locked out upon Resume from Suspend or Save to Disk mode until you enter the password. When set to Disabled no password is required. If no Supervisor Password is set, this feature is not available and no password is required. Supervisor only allows access to boot the computer to removable media after the Supervisor Password is entered. When disabled, the BIOS Flash memory will be write protected. Configures hard disk security features Sets Owner information. Opens the Trusted Platform Module (TPM) Security Chip Setting submenu to configure the Security Chip. Exiting from the Security Menu When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys. 23