Fujitsu FI 4220C Quick Installation Guide - Page 1
Fujitsu FI 4220C - Document Scanner Manual
View all Fujitsu FI 4220C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Quick Installation Guide Refer to the "fi-4220C Image Scanner Operator's Guide" when you would like to know more about the scanner. Refer to the "Scanner Utility for Microsoft R Windows R User's Guide" on the Scanner driver CD-ROM when you would like to know more detailed information about the FUJITSU TWAIN32 Scanner driver installation. Carefully read the "fi-4220C Image Scanner Operator's Guide" before using this product. Particularly read and understand the "Safety Precautions" before using this product. 1 Check the scanner and accessories Confirm that all of the following items are included. Scanner USB interface cable ADF paper chute fi-XXXX XXXXXXXXX fi-4220C Image Scanner Operator's Guide 4 Connect the USB interface cable, SCSI interface cable and the AC cable Caution Confirm that the power of PC and the image scanner device is turned off. 1. Connect either the USB interface cable or the SCSI interface cable. When using Windows R 95, Windows NT R 4.0,connect the SCSI interface cable. Connecting the USB interface cable 1 Connect the PC end of the USB interface cable to the PC. 2 Connect the scanner end of the USB interface cable to the scanner. 3. Insert the AC cable into the power outlet. Next, install the FUJITSU TWAIN32 Scanner driver. SCSI interface connector USB interface connector DC inlet Connecting the SCSI interface cable 1 Connect the PC end of the SCSI interface cable to the PC. 2 Connect the scanner end of the SCSI interface cable to the scanner. 3 Check the SCSI ID switch. The SCSI ID switch is set to No. 5. If another device has the same ID then change the SCSI ID. Refer to the "fi-4220C Image Scanner Operator's Guide" for information about the procedure to change the SCSI ID. Caution • It is necessary to separately purchase a SCSI interface cable and a SCSI card which are available commercially. See "fi-4220C Image Scanner Operator's Guide" for details. • Connect the scanner so that it is the terminator SCSI device. 2. Connect the AC adapter with the AC Cable, and then connect it to the DC inlet on the Scanner. AC cable(*2) USB interface cable(*1) SCSI interface cable(*1) *1) Connect to your PC. *2) Connect to the power outlet. • When using WindowsR 98, WindowsR Me, WindowsR 2000 or WindowsR XP, perform the procedure in step to complete installation. • When using WindowsR 95 or Windows NT R 4.0, perform the procedure in to complete the installation. Manual CD-ROM FUJITSU TWAIN32 Scanner Driver CD-ROM FUJITSU ISIS Scanner Driver CD-ROM Adobe R Acrobat R 5.0 CD-ROM AC cable AC adapter fi-4220C Quick Installation Guide FUJITSU ISIS Scanner Driver Quick Installation Guide 2 Release the Shipping Lock Make sure to slide the shipping lock in place (located on the bottom of the scanner) to secure the internal carrier unit during transportation. After transporting and placing the scanner, tilt the scanner (approx. 30 degrees) and release the shipping lock. See the "fi-4220C Image Scanner Operator's Guide" for further details. Lock Release 3 Attach the ADF paper chute 1. Holding the ADF paper chute, insert it so that the two tabs on the chute slot into the holes on the rear of the scanner. Attach the ADF paper chute so that the side with the side guides is face up. ADF paper chute tab Side guide 5-a Install FUJITSU TWAIN32 Scanner driver WindowsR 98,WindowsR Me,WindowsR 2000,WindowsRXP Caution Install the mini-driver first, and then the TWAIN data source. If the old version of FUJITSU TWAIN32 Scanner driver has been installed on your personal computer, refer to the "Scanner Utility for Microsoft R Windows R User's Guide" on the Scanner driver CD-ROM, and update the mini-driver. The Windows R XP screen samples are shown below. The screen and operations will differ slightly depending on the OS that is being used. Preparation Confirm that the Scanner is connected to your personal computer with the USB interface cable or SCSI interface cable. Installing the mini-driver 1. Turn on the power by pushing the power switch on the scanner's control panel. The green LED on the control panel lights. The Function No. display shows to the order "8","P","0","1". When Function No. display reaches "1" the scanner is ready. 2. Turn on your personal computer and log on to WindowsR. When using WindowsR 2000 or WindowsR XP log on as an administrator . The "Found New Hardware Wizard" dialog box is displayed. 3. Check "Install from a list or specific location (Advanced)", then click [Next]. 4. Insert the Scanner driver CD-ROM 5. Select "Search for the best driver in these locations". Check "Include this location in the search:" then specify D:\Driver2 (When your CDROM is the D drive). After that click [Next]. For Windows R 98, just check "Specify a location:" then specify D:\Driver2 (When your CD-ROM is the D drive). After that click [Next]. For Windows R Me, select "Search for the best driver for your device." Check "Specify a location" then specify D:\Driver2 (When your CD-ROM is the D drive). After that click [Next]. For Windows R 2000, just check "Specify a location" and then in the next screen specify "Copy manufacturer's files from:" then specify D:\Driver2 (When your CD-ROM is the D drive), then click [OK]. For Windows R Me, check "Specify the location of the driver (Advance)", then click [Next]. For Windows R 2000 and Windows R 98, clicking on [Next] the select search method screen is displayed. • For Windows R 98, select "Search for the best driver for your devise. (Recommended)" then click [Next]. • For Windows R 2000, select "Search for a suitable driver for my device (Recommended)" then click [Next]. Continued on next page P3PC-E057-03EN