Fujitsu FI 5120C Operator's Guide - Page 144
Detection by Document Overlapping, Detection by Document Length, Detection by Document Overlapping
UPC - 000057129044
View all Fujitsu FI 5120C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
fi-5120C / fi-5220C Image Scanner Operator Guide TROUBLE SHOOTING CONTENTS MAP TOP 1 2 There are three multi feed detection modes: document overlapping, document length, and both document thickness and length. The following conditions must be satisfied in each of these detection modes. Detection by Document Overlapping Sheets of the same thickness shall be set in the ADF at a time. Document thickness: 0.065 to 0.15mm Punched holes are not allowed within 35mm of the vertical center line of the document. Other paper shall not be glued within 35 mm (1.4 in) of the vertical centerline of the document. Detection by Document Length Sheets of the same length shall be set in the ADF at a time. Document length deviation: 1% or less Punched holes are not allowed within 35mm of the vertical center line of the document. Detection by Document Overlapping and Length Sheets of the same thickness and length shall be set in the ADF at a time. Document thickness: 0.065 to 0.15mm Document length deviation: 1% or less Punched holes are not allowed within 35mm of the vertical center line of the document. Other paper shall not be glued within 35 mm (1.4 in) of the vertical centerline of the document. ATTENTION Multifeed detection by overlap will often mis-detect very thick paper or plastic document. When scanning documents like this, please disable the multifeed detection. 1 2