Fujitsu Fi-5110EOX2 Operating Guide

Fujitsu Fi-5110EOX2 - ScanSnap! - Document Scanner Manual

Get Fujitsu Fi-5110EOX2 - ScanSnap! - Document Scanner PDF manuals and user guides View all Fujitsu Fi-5110EOX2 manuals
Add to My Manuals
Save this manual to your list of manuals

Fujitsu Fi-5110EOX2 manual content summary:

  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 1
    P3PC-1152-02EN Color Image Scanner TM fi-5110EOX2 Operator's Guide SCAN POWER DCUOPLLOEXR
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 2
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 3
    slower. (*2) ScanSnap fi-5110EOX2 does not support TWAIN and ISIS standards. This document describes how to handle ScanSnap fi-5110EOX2 and basic operation methods. Before you start using ScanSnap fi-5110EOX2 be sure to thoroughly read this manual to ensure correct use. ScanSnap fi-5110EOX2 is
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 4
    Contents of the Scanner Package 2 1.2 Names and Functions of Parts 3 Front Side 3 Operation Button 4 Rear Side 4 Chapter 2 Connecting ScanSnap 5 2.1 Installing ScanSnap 6 Before Installing ScanSnap 6 Installing Adobe Acrobat 8 Installing Supplied Programs 11 2.2 Connecting ScanSnap to your
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 5
    to your needs 77 Scanning only one side of a document 78 Scanning color document in black and white 79 Skipping blank pages 80 Deleting pages from PDF files 103 3.10 Using ScanSnap Organizer 105 Starting ScanSnap Organizer 105 Operating Window 106 ScanSnap fi-5110EOX2 Operator's Guide iii
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 6
    3.11 Updating ScanSnap Manager 116 Chapter 4 Uninstalling ScanSnap 119 4.1 Uninstalling Supplied Programs 120 Chapter 5 Troubleshooting 123 5.1 Clearing Document Jams 124 5.2 Troubleshooting Checklist 126 Chapter 6 Daily Care 133 6.1 Cleaning Materials 134 6.2 Cleaning the Scanner Exterior
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 7
    Appendix A Installation Specifications 155 Repairs 157 Index 159 ScanSnap fi-5110EOX2 Operator's Guide v
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 8
    to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 9
    proprietors can participate voluntarily. The targeted products are office equipment such as computers, monitors, printers, facsimiles, copiers, scanners, and multifunction devices. Their standards and logos ( ) are uniform among participating nations. ScanSnap fi-5110EOX2 Operator's Guide vii
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 10
    or by statements of any kind in this manual, its updates or supplements, whether such errors are omissions or in the control of nuclear reactions at nuclear power facilities, automatic flight control of aircraft, air scanner. •Do not breathe the chemical liquid contained in the scanner parts. viii
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 11
    In This Manual ScanSnap: ScanSnap fi-5110EOX2 CardMinder: CardMinder™ 2.0 References to operating systems (OS) are indicated as follows: Windows 98: Microsoft® Windows® 98 operating system. Windows Me: Microsoft® Windows® Millennium Edition operating system. Windows 2000: Microsoft
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 12
    particular, be sure to read and fully understand the Safety Precautions described in this manual before you use this product. Also, store this manual in a safe place so that it can be easily referred to during use of with your computer. Operation This symbol shows operation with your scanner. x
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 13
    manual are created according to Microsoft Corporation's Guideline. About Maintenance The user must not perform repairs on this scanner. Contact the store where you purchased the scanner or an authorized FUJITSU Image Scanner service provider to make repairs to this product. ScanSnap fi-5110EOX2
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 14
    , since this might cause equipment failure and other troubles or an electric shock. Use this scanner only at the indicated power voltage. Do not connect to multiple-power strips. Use this scanner only at the indicated power voltage and current. Improper power voltage and current might cause fire or
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 15
    where there are small children. Do not touch the inside of the scanner unless necessary. Do not take apart or modify the scanner. The inside of the scanner contains highvoltage components. Touching these components might cause fire or electric shock. ScanSnap fi-5110EOX2 Operator's Guide xiii
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 16
    surface that is free of vibration to prevent it from falling. Install the scanner on a strong surface that will support the weight of the scsanner and other devices. Firmly insert the power plug. Firmly insert the power plug into the power outlet as far it can go. Do not block the ventilation ports
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 17
    a cold room. This may cause condensation, which might lead to scanning errors. Let the device dry about one or two hours before you use it. ScanSnap fi-5110EOX2 Operator's Guide xv
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 18
    Be careful not to cut yourself When handling paper or the Carrier Sheet, please be careful not to cut yourself on the paper or the Carrier Sheet. xvi
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 19
    Chapter 1 Before You Start Using Your Scanner 1 This chapter describes the necessary preparations before using ScanSnap. 1.1 Checking the Contents of the Scanner Package 2 1.2 Names and Functions of Parts 3 ScanSnap fi-5110EOX2 Operator's Guide 1
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 20
    1.1 Checking the Contents of the Scanner Package When you unpack the scanner package, make sure that the package contains all the parts on the list included in the package. 2
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 21
    towards you. Operation button ⇒Refer to the next page. Stacker Before using the stacker, pull it out as shown above. You can also use the scanner without the Stacker. HINT ScanSnap fi-5110EOX2 Operator's Guide 3
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 22
    Button SCAN POWER DUPLEX COLOR ■ Rear Side [SCAN] button Press this button to start the scanning. [POWER] button Turns on/off the power supply. Power lamp Indicates the scanner status. Green; Lighting :Ready Green; Blinking :Scanning Orange; Lighting :Error Light off :Power off USB
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 23
    , uninstall it before starting th installation. ScanSnap Manager includes the driver software for ScanSnap fi-4110EOX3 HINT and ScanSnap fi-5110EOX. If you already have any of these: ScanSnap fi- 5110EOX2 (this product), ScanSnap fi-4110EOX3, or ScanSnap fi-5110EOX, you can connect one of them
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 24
    Windows Me • Windows 2000 • Windows XP (Service Pack 1 or later) ScanSnap Manager ScanSnap Organizer CardMinder Adobe Acrobat 7.0 PDF Thumbnail View Windows 98 3 3 3 Windows 98 (2nd Edition) 3 3 3 Windows Me 3 3 3 Windows 2000 3 3 3 3*1 3 Windows XP 3 3 3 3 3 *1: Compatible with Service Pack
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 25
    up your personal computer. When using Windows 2000 or Windows XP, log on as a user with "Administrator" privileges (computer administrator privileges when using Microsoft Windows XP Home Edition operation system) 4. Close all currently running programs. ScanSnap fi-5110EOX2 Operator's Guide 7
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 26
    supported by Windows 98 and Windows Me. If you are using one of these OS, please install Adobe® Acrobat® Reader™ following the instructions in the hint below. * For further details, please visit Adobe Web Site http://www.adobe.com Adobe Acrobat is required for displaying the "ScanSnap fi-5110EOX2
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 27
    window is not displayed automatically when the "Auto play" setting of your HINT computer is deactivated. In this case, please run "AutoPlay.exe" of this CD- ROM directly using the "Explore" or "My computer". 2. Select the language and Click [OK] button. Connecting ScanSnap ScanSnap fi-5110EOX2
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 28
    3. Select "Install Adobe Acrobat 7.0 Standard". 4. Follow the instructions to isntall the software. Select "How to install" on the "Adobe Acrobat 7.0 Standard" window to learn HINT more about the Adobe Acrobat 7.0 installation. Refer to "Adobe Acrobat Help" about how to use Adobe Acrobat 7.0.
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 29
    is displayed. 2 Connecting ScanSnap If the "ScanSnap Setup" dialog box is not displayed even after inserting the HINT Setup CD-ROM into the CD-ROM drive, double-click the "Install.exe" icon in the folder of the used CD-ROM drive using the Explorer. ScanSnap fi-5110EOX2 Operator's Guide 11
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 30
    2. Click the [Readme] button in the "ScanSnap Setup" window. This item describes the precautions to follow when installing and uninstalling ScanSnap, as well as the structure of the files on the Setup CD-ROM, and other information. ⇒ When you finished reading this description, close the screen. 3.
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 31
    4. Click the [Next] button in "Welcome to the InstallShield Wizard for the ScanSnap" 2 ⇒ The "License Agreement" screen is displayed. 5. Please read the details of the When you click the [Yes] button, the "Choose Destination Location" screen is displayed. ScanSnap fi-5110EOX2 Operator's Guide 13
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 32
    6. In the "Choose Destination Location" screen, choose the installation directory and click the [Next] button. To install ScanSnap in the displayed folder, click the [Next] button. Normally, there is no need to change the folder in the installation directory. Change the installation directory
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 33
    Connecting ScanSnap ⇒ The next "ScanSnap Manager Setting" screen appears. You can change this setting after installation. HINT Refer to "Allow documents to be scanned face up through the ADF" (page 57)" of "3.4 Changing Scan Settings" for more details. ScanSnap fi-5110EOX2 Operator's Guide 15
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 34
    9. In the "ScanSnap Manager Setting" screen, to execute "Notify scanning result" after scanning, select click the [Next] button. ⇒ This starts the installation of the programs supplied with ScanSnap. After the installa- tion is finished, the "InstallShield Wizard Complete" screen will be displayed.
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 35
    ScanSnap Orga- HINT nizer User's Guide", and "CardMinder User's Guide, " Adobe Acrobat or Adobe® Acrobat® ReaderTM is required. If this software is not installed on your PC, install Acrobat 7.0 from the "Adobe Acrobat 7.0 CD-ROM" supplied with the scanner. ScanSnap fi-5110EOX2 Operator's Guide
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 36
    to your PC. 1. Connect ScanSnap to a power outlet using the AC cable. 2. Connect ScanSnap to your PC using the USB cable. ATTENTION • Be sure to connect the AC cable first before connecting the USB cable. • Be sure to install ScanSnap Manager to your PC before connecting ScanSnap to your PC. (For
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 37
    ScanSnap scanner. Connecting ScanSnap USB cable Seal 2. Insert the USB cable into the USB connector of ScanSnap and plug the other end of the cable into the USB port on your PC. Insert firmly the USB-cable as far as it can go into the connector. USB cable ScanSnap fi-5110EOX2 Operator's Guide
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 38
    3. Open the paper chute cover of ScanSnap. Paper chute cover [POWER] button ⇒ ScanSnap is automatically turned on and detected by your PC. ATTENTION If the scanner is not automatically turned on, push the [POWER] button on the scanner. ■ For Windows 98 The "Insert Disk" request is displayed.
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 39
    ) 2) Click the [Next] button in the following window. Connecting ScanSnap ATTENTION Althought the message "If your hardware came with an installation CD or floppy disk, insert it now." is displayed, you do not need to insert the CD into the CDROM drive. ScanSnap fi-5110EOX2 Operator's Guide 21
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 40
    "ScanSnap Manager" icon on the task bar to be displayed as S . Push the [POWER] button on the scanner when the icon remains as S . When you turn off/on the scanner, , the [POWER] button does not work unless it is pressed for longer than one second. The power supply of this scanner is controlled
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 41
    Chapter 3 Basic Scanner Operations This chapter describes the basic operations of ScanSnap. 3 3.1 Flow of Operations 24 3.2 Scanning Different Document PDF File Thumbnails 102 3.10 Using ScanSnap Organizer 105 3.11 Updating ScanSnap Manager 116 ScanSnap fi-5110EOX2 Operator's Guide 23
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 42
    it. 3. Turn on your PC. ⇒ The "ScanSnap Manager" icon appears when Windows is started up. 4. Open the paper chute cover. Paper chute cover [POWER] button ⇒ The scanner is turned on and the "ScanSnap Manager" icon will change from S to S . If the scanner is not automatically turned on even when
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 43
    - tion. • Do not close the paper chute cover or press the [POWER] button on the scan- ner during the scanning operation. ⇒ The lamp on the scanner lights green during the scanning operation. The following window appears to indicate the scanning status. ScanSnap fi-5110EOX2 Operator's Guide 25
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 44
    ⇒ The supplied application (ScanSnap Organizer, etc.) is started up and the scanned image is displayed. For details about the settings ). As the default setting, documents are scanned according to the following set- HINT ting: "Scaning quality: Normal" and "Color mode: Auto Color Detection". 26
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 45
    , reduce noise of back side image, auto- Basic Scanner Operations matically remove blank pages, adjust skewness, change loading [Recognize Text Using OCR] - [Start...] In case of using colored images, verify that the image has been scanned in "Better" ScanSnap fi-5110EOX2 Operator's Guide 27
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 46
    ] button for longer than HINT one second. *For preventing mis-operation, the [POWER] button does not work unless it is pressed for longer than one second. ATTENTION • Depending on your PC, the ScanSnap scanner is initialized several times while starting up the PC. • It may take two to three
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 47
    Disconnect the AC cable from the power outlet. The power of the scanner is controlled by turning on/off of the PC or opening/ HINT closing of the paper chute cover. In general you do not have to turn on/off the scanner when it is connected to your PC. ScanSnap fi-5110EOX2 Operator's Guide 29
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 48
    3.2 Scanning Different Document Types The table below summarizes the types of documents that can be scanned on this scanner. Media Weight Size When scanning documents directly Paper commonly used in offices, Post card, Business card 52 g/m2 to 127 g/m2 (14 lb to 34
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 49
    Pad ASSY or rollers (e.g. Pick roller) when documents are fed. Pay attention to the following: - Clean the Pad ASSY or rollers as frequently as possible. - The service life of the scanner may be shortened compared with the case of scanning woodfree paper. ScanSnap fi-5110EOX2 Operator's Guide 31
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 50
    when you use the Carrier Sheet. ATTENTION • Use only the Carrier Sheet for ScanSnap. • Avoid writing, coloring, staining or cutting the black and white pattern part of the Carrier Sheet. Otherwise, the scanner cannot recognize the Carrier Sheet correctly. • Load the Carrier Sheet one by one
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 51
    number of the sheets in the document stack. The standard number of sheets that can be loaded on the scanner is as follows: For A4-size paper or smaller, a document stack of 5 mm or less (50 sheets with both hands, and bend the documents into an arch. 5mm ScanSnap fi-5110EOX2 Operator's Guide 33
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 52
    reference marks on the side guides. Reference mark AB12C3D45E6F78G90 Paper chute cover Side guide ATTENTION If the check box for [Allow documents to be scanned face up through the ADF] of [Scanning] [Options] in the "Scan and Save Settings" window of ScanSnap Manager is selected, set the front
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 53
    document width. Move the side guides so that there is no space between the document edges and the side guides. If there is a space between the document edges and the guides, the scanned images may be skewed. Document Side guide Basic Scanner Operations ScanSnap fi-5110EOX2 Operator's Guide 35
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 54
    the stacker, scanned document sheets will not be separated when HINT they have passed through the scanner. For details on how to attach the stacker to the scanner, refer to "Names and Functions of Parts" on page 3. Use the stacker as follows. 1. Pull out the stacker towards you while holding it
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 55
    ScanSnap fi5110EOX2. Scanner Operations ATTENTION • When you use the Carrier Sheet, select [Automatic Detection] on the setting of the [Paper size] tab in "ScanSnap Manager". Also, if scanning is done using "Create facing pages in one image", select "Duplex ScanSnap fi-5110EOX2 Operator's Guide 37
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 56
    11 x 17. Fold a document in two, scan in duplex and an image joined together is generated. (If a document smaller than A4 printed on both sides is scanned, it is possible to output a two-page spread image.) Operation 1. Right-click "ScanSnap Manager" icon S on the task bar, and select "Carrier Sheet
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 57
    "Settings...". ⇒The [Scan and Save Settings] window appears. 3 4. Select "Duplex Scan" in "SCAN button" on the [Scanning] tab. Basic Scanner Operations 5. Select "Automatic Detection" in "Paper size:" on the [Paper size] tab, and click the [OK] button. ScanSnap fi-5110EOX2 Operator's Guide 39
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 58
    portion to the top-right corner closely. 8. Load the Carrier Sheet onto the scanner. • Place the top of the sheet with the black & white printed pattern direction of the arrow. • When you load the Carrier Sheet, adjust the side guides so that it will not skew. • If you are using the Carrier Sheet
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 59
    set in a facing-page state and generated side by side. ATTENTION Basic Scanner Operations There may be a gap in the joined portion, or a line the front side back. In the "Carrier Sheet Settings" window, when "Automatic Detection" in "Output image size" is ScanSnap fi-5110EOX2 Operator's Guide 41
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 60
    to scratch, or clippings of information that are difficult to be fed. Operation 1. Right-click "ScanSnap Manager" icon S on the task bar, and select "Carrier Sheet...". 2. On the "Carrier Sheet Settings" window, select "Create front and back images separately" on "Mode" and click the [OK] button. 42
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 61
    3.3 Loading Documents 3. Right-click "ScanSnap Manager" icon S on the task bar, and select "Settings...". ⇒The [Scan and Save Settings] window appears. 3 4. Select "Automatic detection" in "Paper size:" on the [Paper size] tab. Basic Scanner Operations ScanSnap fi-5110EOX2 Operator's Guide 43
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 62
    of the Carrier Sheet. 6. Load the Carrier Sheet onto the scanner. • Place the top of the sheet with the black • When you load the Carrier Sheet, adjust the side guides so that the document inside will not skew. • If Settings" window of ScanSnap Manager is selected, set the front of the document with the
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 63
    center of the specified size of the output image. In the "Carrier Sheet Settings" window, when "Automatic Detection" in "Output image size" is selected, an ideal size the document that is cut into an unusual shape Basic Scanner Operations white paper ScanSnap fi-5110EOX2 Operator's Guide 45
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 64
    to notify whether the removal of blank paper/image rotation has been done appears after scanning. The "Check consumable supplies" window appears. Exit ScanSnap Manager Displays Help, the About window, and the Online Update window. This section describes the settings on the "Scan and Save Settings
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 65
    . Operation 3.4 Changing Scan Settings 1. Right click the "ScanSnap Manager" icon on the task bar and select [Setting...] from "Scan and Save Settings" window. Basic Scanner Operations The following describes the setting items of each of the tabs. ScanSnap fi-5110EOX2 Operator's Guide 47
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 66
    - • Scan to File (image data will be simply saved as files) • Adobe®Acrobat® • Adobe®Acrobat® Reader™ or Adobe® Reader® • CardMinder • ScanSnap Organizer • The above applications automatically become selectable when they are HINT currently installed. If they have been uninstalled, they are
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 67
    add an application> 1 Click the [Add...] button. 2 The following screen is displayed. Basic Scanner Operations • Click the [Browse...] button, and select either the shortcut file (.lnk) of When you have finished the above setting, click the [OK] button. ScanSnap fi-5110EOX2 Operator's Guide 49
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 68
    If the application starts up and the file opens, the application supports JPEG format files. However, certain applications that satisfy the above case, start up the application first and then open the files created by ScanSnap. 1 Select the application you want to
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 69
    the [Browse...] button, the "Browse for Folder" screen is displayed. Select the folder to save the scanned image to and click the [OK] button. Basic Scanner Operations ATTENTION The function "Make New Folder" is not provided for Windows 98. ScanSnap fi-5110EOX2 Operator's Guide 51
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 70
    [Browse] button are grayed out, and you cannot specify the folder to save images to from this window. In this case, scanned images are saved in the "My ScanSnap Folder" specified by ScanSnap Organizer (page 108). ■ [Filename format...] button Set the name of the file to save the scanned image
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 71
    the [Save scanned image as] window appears after scanning. 3 Basic Scanner Operations You can change the folder ScanSnap Organizer" at "Application", the following window appears after scanning. In this case, you cannot change the folder to save images to. ScanSnap fi-5110EOX2 Operator's Guide
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 72
    and 300 dpi for B&W, Fine is equiva- HINT lent to 200 dpi for color and 400 dpi for B&W, Best is equivalent to 300 dpi for color and 600 dpi for B&W, and Excellent is equivalent to 600 dpi for color and 1200 dpi for B&W. Generally, the higher the required scanning quality is specified, the
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 73
    when pressing the [SCAN] button SCAN on the scanner. Select [Duplex Scan] or [Simplex Scan] from the menu. ■ [Option...] button With this item you can configure other scanning related settings. Clicking the [Option...] button displays the following screen. ScanSnap fi-5110EOX2 Operator's Guide 55
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 74
    available when "B&W" is currently selected at "Color mode:" or when "Auto" is selected at "Color mode:" and black-andwhite documents are automatically documents containing both two-sided and one-sided documents is scanned in Duplex mode, this feature removes only the back sides (i.e. blank pages)
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 75
    letters • Documents with handwritten characters *When you scan such documents, clear the check box. Basic Scanner Operations ■ Allow documents to be scanned face up through the ADF Select the check box if the process of sorting the data after scanning. ScanSnap fi-5110EOX2 Operator's Guide 57
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 76
    after current scan is finished After scanning, a message confirming whether to continue scanning appears. To continue scanning, load a document onto the scanner, and click the [Continue Scanning] button. To finish scanning, click the [Finish Scanning] button. At the point where scanning ended, the
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 77
    settings of PDF files. This button is enabled when "PDF(*.pdf) is specified at [File format:]. Click [Option] button to display the following dialog box. ScanSnap fi-5110EOX2 Operator's Guide 59
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 78
    • "Generate one PDF file per scan" Creates a merged PDF file of all the scanned images. • "Generate one PDF file per xx pages" Creates a new PDF file at each set page. For example, when "2" pages are set in this option, scanning 6 pages of documents creates 3 files. ATTENTION If you select Adobe
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 79
    Operations ■ Paper size: Specify the size of the document to be loaded on the scanner. Click to select the size. The following paper sizes (W x L) can be selected. • Automatic detection To use the Carrier Sheet, "Automatic detection" must be selected. ScanSnap fi-5110EOX2 Operator's Guide 61
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 80
    function, you can register up to 5 customized document sizes at the [Paper size:] menu. Clicking this button displays the following setting window: ' 1) Click the [Add...] button. 2) The following screen appears. - Enter the document size within the range
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 81
    Close] to exit from the "Add or Remove Custom sizes" window. When "Automatic detection" is specified, the scanner automatically detects the HINT document size and select an appropriate document 90 mm (horizontal position), or 55 mm (vertical position). ScanSnap fi-5110EOX2 Operator's Guide 63
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 82
    [Compression] tab ■ Compression rate: Control the compression rate to specify the size of the file for the scanned image. The compression rate is controlled by moving the slider. The larger the compression rate number is specified, the higher the compression rate is set and the smaller the file
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 83
    394 782 4272 117 186 352 1793 High Compression 217 214 221 521 3 Basic Scanner Operations Color mode: B&W Scan mode Normal quality Better quality Best quality Excellent quality Compression rate with many characters in "Color" mode (at Best/Excellent). ScanSnap fi-5110EOX2 Operator's Guide 65
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 84
    3.5 Saving Scan Settings You can save and assign names to the current settings in ScanSnap Manager. With just a click of the ScanSnap icon, you can retrieve and use the saved settings easily. You can create different types of frequently used scanning conditions in advance, and when you
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 85
    ⇒The current settings and the entered name is created in "Current Setting". 3 Basic Scanner Operations 5. Click the [OK] button, and the "Scan and Save Settings" window closes. ⇒A scan setting is created, You can create a maximum of 9 scan settings. HINT ScanSnap fi-5110EOX2 Operator's Guide 67
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 86
    1. Click the ScanSnap icon S . ⇒The list of saved settings appears. (The icon of the program that starts after scanning appears on the left of the settings names.) 2. Select the scan setting to use. ⇒A check mark appears on the selected setting. 3. Load the document on the scanner. SCAN 4. Click
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 87
    The "Scan and Save Settings" screen appears. 2. On "Current Setting:", select the name of the setting you want to change. Basic Scanner Operations 3. Click the [Rename] button. ⇒The "Save As" screen appears. 4. Enter a new name, and click the [OK] button. ScanSnap fi-5110EOX2 Operator's Guide 69
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 88
    You can also rename the setting from the "Settings Management" screen. HINT Right-click the ScanSnap icon S , and the "Settings Management" screen appears when you select it. Select the name you want to change, and click the [Rename] button. ■ Deleting Scan Settings Operation 1. Right-click the
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 89
    -click the ScanSnap icon S , and the "Settings Management" screen 3 appears when you select it. Select the name you want to delete, and click the [Delete] button. 4. The confirmation dialog box appears. Click the [Yes] button. Basic Scanner Operations ScanSnap fi-5110EOX2 Operator's Guide 71
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 90
    Carrier Sheet settings are changed on the "Carrier Sheet Settings" screen. The "Carrier Sheet Settings" screen is found in the menu of the "ScanSnap Manager icon" S on the task bar. Right-click the icon, and when the menu appears, select "Carrier Sheet...". ⇒The "Carrier Sheet Settings" screen
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 91
    Duplex Scan] on the [Scanning] settings of [ScanSnap Manager]. • The method of loading documents differs with the mode. Refer to "Loading Documents with the Carrier Sheet" (page 37) for more details. Basic Scanner ) Letter (8.5 x 11in, 216 x 279.4 mm） - ScanSnap fi-5110EOX2 Operator's Guide 73
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 92
    case, carry out the following operation. - Insert the document into the Carrier Sheet straight. - When you load the Carrier Sheet onto the scanner, use the side guides to secure the Carrier Sheet. If the situation does not improve with the above methods, specify the size of the document on [Output
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 93
    To add custom size documents 3 1 Click the [Add] button. 2 The following screen appears. Basic Scanner Operations • Enter the document sizes. You can set within these range: Width: 50.8 - 216 mm (2 size is deleted, and click the [Close] button. ScanSnap fi-5110EOX2 Operator's Guide 75
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 94
    To change settings 1 On the [Add or Remove custom sizes] screen, select the setting of the document size you want to change, and click the [Change] button. 2 The [Additional custom sizes settings] screen appears. Change the items you want to change. 3 When you have completed the settings, click the
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 95
    High Compression: OFF • Carrier Sheet settings: Mode: Create facing pages in one image Output image size: Automatic detection The settings above can be changed with ScanSnap Manager. For details, refer to the section "Changing Scan Settings" on page 46. ScanSnap fi-5110EOX2 Operator's Guide 77
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 96
    below. Operation 1. Right click the "ScanSnap Manager" icon S on the task bar and select "Setting" from the menu. 2. Click [Scanning] tab and select "Simplex scan" at "SCAN button:"s. 3. Click [OK] button to close the window. 4. Load the document onto the scanner. SCAN 5. Press the [SCAN] button
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 97
    If you scan color documents in color, select "Color". Basic Scanner Operations 3. Click the [OK] button to close the dialog box. 4. Load the document onto the scanner. SCAN 5. Press the [SCAN] button . ⇒ Scanned images will be output in black and white. ScanSnap fi-5110EOX2 Operator's Guide 79
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 98
    blank pages ScanSnap is able to recognize blank pages and remove them from the output data. When scanning documents in "Duplex" mode, To change the setting, follow the procedure below. Operation 1. Right click the "ScanSnap Manager" icon S on the task bar and select "Setting..." from the menu. 2.
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 99
    box. 4. Click the [OK] button to close the window. 3 ⇒ The setting is enabled from next scanning. ATTENTION color (including black) and without any patterns, lines, or characters *When you scan such documents, clear the check box. Basic Scanner Operations ScanSnap fi-5110EOX2 Operator's Guide
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 100
    ■ Deleting pages from a PDF file Unnecessary pages of a document which has been scanned and saved as PDF files can be deleted with Adobe Acrobat 7.0. When a blank page could not be skipped with [Allow automatic blank page removal] function (page 80), or you want to delete another unnecessary page,
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 101
    Operation 1. Right click the "ScanSnap Manager" icon S on the task bar and select "Setting..." from the menu. 3 2. Select the [Scanning] tab and click the [Option...] button. 3. Select the "Allow automatic image deskew" check box. Basic Scanner Operations ScanSnap fi-5110EOX2 Operator's Guide 83
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 102
    4. Click the [OK] button to close the window. ⇒ The setting is enabled from next scanning. ATTENTION Up to case of double-sided documents in calendar style, their rear sides are printed upside down. ScanSnap is able to automatically correct the orientation of scanned images for such a document. To
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 103
    Select the "Allow automatic image rotation" check box. 3 Basic Scanner Operations 4. Click the [OK] button to close the window. ⇒ The setting is enabled from next scanning. ATTENTION This characters *When you scan such documents, clear the check box. ScanSnap fi-5110EOX2 Operator's Guide 85
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 104
    ■ Rotating the page view of a PDF file Even after scanning a document and saving it as a PDF file, you can change the page view orientation of this PDF file with Adobe Acrobat. When the [Allow automatic image rotation] function (page 84) fails to correct the orientation of a page view, or you want
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 105
    the rotation. Page range: Specifies the page number of the pages you want to rotate. ⇒ The orientation of the specified page(s) is (are) changed. 3 Basic Scanner Operations For details of this function, refer to "Adobe Acrobat Help". HINT ScanSnap fi-5110EOX2 Operator's Guide 87
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 106
    a batch of documents and create files for every single page. To change the setting, follow the procedure below. Operation 1. Right click the "ScanSnap Manager" icon S on the task bar and select "Setting..." from the menu. 2. Select the [File option] tab and click the [Option...] button. ATTENTION
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 107
    is created at each set of number pages. 3 In "Duplex" mode, two pages (front/back) are created per Basic Scanner Operations 4. Click the [OK] button to close the window. ⇒ ScanSnap Manager" icon S on the task bar and select "Setting..." from the menu. ScanSnap fi-5110EOX2 Operator's Guide 89
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 108
    saving images in PDF format. Make sure that "PDF(*.pdf)" is selected at [File format:]. 3. Click the [OK] button to close the window. ⇒ The setting is enabled from next scanning ATTENTION • This function compresses characters and backgrounds on the document separately. So using this function on
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 109
    . ⇒ The following window appears. 2. Click [Yes] to delete the data that were scanned up to the interruption. Otherwise, click [No] to save the data that were scanned up to the interruption. (*Click [Cancel] not to quit but to return to the previous window. ScanSnap fi-5110EOX2 Operator's Guide 91
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 110
    Click the [Close] button, then the following window appears. 3. Click the [No] button to completely save the image (PDF file) scanned before the interruption (this file is called "File A"). 4. Scan the remaining documents that need to be scanned (this part is called "File B"). 5. Open "File A" with
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 111
    needs 7. Select "File B" in the "Select File to Insert" screen and click the [Select] button. Basic Scanner Operations 3 ⇒The "Insert Pages" window will appear. 8. Select "After" from the Location menu and "Last" from Page radio buttons, then click [OK]. ScanSnap fi-5110EOX2 Operator's Guide 93
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 112
    ...] from the menu bar. 3. In the following window, configure the necessary settings, then click the [OK] button. ⇒ The text information is added to the image data by the "Recognize Text" function. For color documents, in the "ScanSnap Manager - Scan and Save Settings" HINT dialog box select
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 113
    with passwords. Operation 1. Right-click the ScanSnap icon S , and select "Setting...". 3 2. Click the [File Option] tab, and then click the [Option] button. Basic Scanner Operations ATTENTION Check that "PDF (*.pdf)" is selected in "File Format:". ScanSnap fi-5110EOX2 Operator's Guide 95
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 114
    to set your password. HINT Maxium number of characters: 16 Characters: A-Z, a-z, 0-9 Symbols 4. Click the [OK] button. All the screens close. 5. Load the document onto the scanner. SCAN 6. Press the [SCAN] button . ⇒ Scanning starts. 96
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 115
    Basic Scanner Operations ⇒ The scanned document is saved as a password-protected PDF file. ATTENTION This function is enabled only if Adobe Acrobat 7.0 is installed on your computer. Take note that If you forget your password, the PDF file cannot be opened. ScanSnap fi-5110EOX2 Operator's Guide
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 116
    Cards ScanSnap product comes with "CardMinder", an application software for managing business card Guide by selecting [Programs] - [CardMinder] - [CardMinder User's Guide] from the Start menu. (You can also browse the User's Guide from the "Setup CD-ROM" startup screen supplied with this scanner
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 117
    on page 54.) The defaults are "Best" and "Color" for the scan mode. (In this section, business cards are scanned using these default settings.) When CardMinder is selected as [Application:], the option "Excellent" on the [Scanning] tab is not available. ScanSnap fi-5110EOX2 Operator's Guide 99
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 118
    guide [SCAN] button SCAN 2. Press the [SCAN] button on the scanner. • As the default setting, documents are scanned at "Duplex" mode when you HINT press the [SCAN] button. Using "ScanSnap Manager", you can set the scanner or push [POWER] button on the scanner during the scanning operation. 100
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 119
    installed on your PC, you can browse the User's Guide by selecting [Programs] - [CardMinder] - [CardMinder User's Guide] from the Start menu. (You can also browse the User's Guide from the "Setup CD-ROM" startup screen supplied with this scanner.) ScanSnap fi-5110EOX2 Operator's Guide 101
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 120
    - Snap Manager". ("PDF Thumbnail View" will not be installed if your OS is Windows 98 and Windows 98 Second Edition. Furthermore, the "PDF Thumbnail View" cannot be used on Windows Me, since this OS does not support Adobe Acrobat 7.0). For details, refer to section "Before Installing ScanSnap" (page
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 121
    created by ScanSnap are saved in the folder specified in [Image saving folder:] under the [Save] tab of "ScanSnap Manager". (page 51) 3. Select [Thumbnails] from the [View] menu. Basic Scanner Operations ⇒ The thumbnails of the PDF files are displayed. ScanSnap fi-5110EOX2 Operator's Guide 103
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 122
    ATTENTION • The thumbnails of PDF files are refreshed every time the folder is opened. • Images of the PDF files are temporarily displayed on the upper left side of the screen when refreshing the thumbnails. • When there is a large quantity of PDF files saved in one folder, it may take some time to
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 123
    Operation 1. From the [Start] menu, select [All Programs] -> [ScanSnap Organizer] -> [ScanSnap Organizer]. ⇒ The ScanSnap Organizer window appears. Basic Scanner Operations HINT You can also double-click the ScanSnap Organizer icon on the desktop. ScanSnap fi-5110EOX2 Operator's Guide 105
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 124
    Organizer. Toolbar Frequently-used functions are indicated by icons. Folder View Folders selected in ScanSnap Organizer are displayed. Pop-up Thumbnail Window The selected page is displayed in a pop-up window. File View PDF or JPEG files in the selected folder are displayed as thumbnails. Menu
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 125
    in ScanSnap Organizer. Selects all files displayed in File View. View File Name Shows the file name under the displayed thumbnail when the check box is selected. Basic Scanner Operations 3 Pop-up Thumbnail Shows the thumbnail when you select the file. ScanSnap fi-5110EOX2 Operator's Guide 107
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 126
    ) Small Thumbnail: 96 X 96 (Pixels) Thumbnail Top: Shows the upper part of the file Sorts the folders displayed in Folder view in ascending or descending 108 [General Settings] tab My ScanSnap folder: Specifies the location of My ScanSnap folder when ScanSnap Organizer is started. The specified
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 127
    upper part of Scanner Operations 3 Export: Copies the selected PDF or JPEG files to other folders. Attach to e-mail: Opens your e-mail program with the selected PDF or JPEG file attached. Print: Prints the selected PDF or JPEG file. Cut: Cuts the selected file or folder. ScanSnap fi-5110EOX2
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 128
    , the Adobe Acrobat icon is displayed, and a lock icon is displayed on the lower right-hand corner. * However, if [Fixed Password] is set in ScanSnap Manager's [PDF File Options], thumbnails of PDF files with the same password can be displayed. Refer to "Using a Fixed Password" (page 61) for more
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 129
    Thumbnail Top 3.10 Using ScanSnap Organizer 3 Basic Scanner Operations ScanSnap fi-5110EOX2 Operator's Guide 111
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 130
    the scanned images is explained. Preparation Operation 1. Right-click the "ScanSnap Manager" icon S on the task bar and select "Setting..." from the menu. ⇒ The "Scan and Save Settings" screen appears. 2. Select "ScanSnap Organizer" on "Application:" on the [Application] tab. 3. Click the [OK
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 131
    displayed as a thumbnail. 3 Basic Scanner Operations The scanned image is saved in the folder specified in [My ScanSnap Folder] on HINT the [Option Settings] window. (Refer to page 108) *The initial setting is [My ScanSnap Folder] under [My Documents]. ScanSnap fi-5110EOX2 Operator's Guide 113
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 132
    the Cabinet and folder is explained here. The idea is similar to arranging a big pile of documents (files) in the room ([My HINT ScanSnap] folder), purchasing a new shelf (Cabinet) and a new document tray (folder), and classifying them according to subject to sort out the documents. Operation
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 133
    3.10 Using ScanSnap Organizer 5. Enter a Folder name. 6. Repeat Steps 4, 5 to create folders as needed. As Drag-and-drop the selected file to the destination folder. Basic Scanner Operations 9. Repeat Steps 7, 8 to store files in the destination folders. ScanSnap fi-5110EOX2 Operator's Guide 115
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 134
    . We recommend that you HINT update your program regularly. When updating ScanSnap Manager, follow the instructions below. ATTENTION • When updating, it is essential that Internet Explorer is installed in a system which can access the Internet. • For Windows XP or Windows 2000, you must log on
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 135
    , Internet Explorer opens and HINT information about the latest update for ScanSnap Manager appears. ⇒ Installation starts, and the "Welcome to InstallShield Wizard for ScanSnap Manager" window appears. Follow the instructions on the screen to install. ScanSnap fi-5110EOX2 Operator's Guide 117
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 136
    118
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 137
    Uninstallation" removes the ScanSnap program files that were copied during the installation from the hard disk to restore the system environment to its original state. This chapter describes how to uninstall ScanSnap 4 4.1 Uninstalling Supplied Programs 120 ScanSnap fi-5110EOX2 Operator's Guide 119
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 138
    (ScanSnap Manager, CardMinder and PDF Thumbnail View) supplied with ScanSnap. 1. Start up your PC. When using Windows 2000 or Windows XP, log list of the currently installed applications. 4. Select the application to uninstall. (1) When uninstalling ScanSnap Manager Select "ScanSnap Manager".
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 139
    to the operating system (OS) you are using. Follow the on-screen instructions of the OS. Example: When the OS is Windows 2000 • "Add or Remove Programs" → "Add/Remove Applications" • [Change/Remove] button → [Add/Remove] button 4 Uninstalling ScanSnap ScanSnap fi-5110EOX2 Operator's Guide 121
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 140
    122
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 141
    Chapter 5 Troubleshooting This chapter describes how to remove jammed documents and remedy other troubles. 5 5.1 Clearing Document Jams 124 5.2 Troubleshooting Checklist 126 ScanSnap fi-5110EOX2 Operator's Guide 123
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 142
    to get injured when removing the jammed document. • When removing the jammed document, be careful not to get neckties or necklaces entan- gled in the scanner. • The surface of the ADF glass becomes hot during operation. Take care not to get burned. Clean the ADF referring the guidelines in
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 143
    ADF cover. Paper chute cover 5 Troubleshooting ADF cover ⇒ You should hear the ADF cover click when it returns to its original position. ATTENTION Make sure that the ADF is completely closed. Otherwise, paper jams or other feeding errors may occur. ScanSnap fi-5110EOX2 Operator's Guide 125
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 144
    Troubleshooting Checklist This section describes common problems that may occur during the usage of ScanSnap and how to remedy them. Before you ask for repair service, please check the following items. If you cannot solve the problem after checking the following items, contact an authorized FUJITSU
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 145
    " window, and scan the document. Clean the inside of the ADF following the instructions in "6 Daily Care" (page 133). Load the document correctly. Adjust "Brightness" at [Scanning] - [Option...] in the "Scan and Save Settings" window. Troubleshooting 5 ScanSnap fi-5110EOX2 Operator's Guide 127
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 146
    in the document sheet to 5mm thickness or less. Clean the Pick roller following the instructions in "6.3 Cleaning the Inside of the Scanner" (page 136). Clean the Pick roller following the instructions in "7.3 Replacing the Pick Roller" (page 147). Remove any debris from the document feeding path
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 147
    ] of the [Scanning] tab of [Scan and Save Settings]. Refer to " Allow automatic image deskew." (page 56) Refer to " Allow automatic image rotation." (page 57) Troubleshooting 5 ScanSnap fi-5110EOX2 Operator's Guide 129
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 148
    (*1): For Windows XP, From "Device Manager", right click on computer name an perform "Scan for hardware changes". (*2) - Confirm PC and ScanSnap are powered on and connected properly. - From Device Manager, check if ScanSnap is recognized as unknown device. If so, delete it from [Control Panel] - [
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 149
    -feed" is a phenomenon where two or more sheets are fed into the scanner together. * Visit our Web site for your reference. Other useful information will be posted on the FAQ corner at the following Web site. http://scansnap.fujitsu.com 5 ScanSnap fi-5110EOX2 Operator's Guide 131 Troubleshooting
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 150
    132
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 151
    Shock Before you clean the scanner, turn off the scanner and disconnect the AC adapter from the power outlet. 6 6.1 Cleaning Materials 134 6.2 Cleaning the Scanner Exterior 135 6.3 Cleaning the Inside of the Scanner 136 6.4 Cleaning Carrier Sheet 139 ScanSnap fi-5110EOX2 Operator's Guide 133
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 152
    Materials Cleaning Materials Cleaner F1 Parts No. CA99501-0013 Remarks 1 bottle (100ml) Moisten a cloth with this fluid and wipe the scanner clean. (*1) Lint-free dry cloth Commercially available. (*2) *1) To purchase cleaning materials, contact the FUJITSU scanner dealer where you purchased
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 153
    from getting inside the scanner. • Do not use aerosol sprays to clean the scanner. Aerosol sprays cause dirt and dust to enter the scanner, resulting scanner failure and malfunction. Cloth Cleaner F1 or neutral detergent Paint thinner 6 Daily Care ScanSnap fi-5110EOX2 Operator's Guide 135
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 154
    with a cloth moistened with Cleaner F1. In an alternating succession of scanning documents, the accumulated paper-powder and dust inside the scanner causes a scanning error. As a guideline, clean the ADF every 1,000 scans. Note that this guideline varies according to the type of the documents
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 155
    ADF cover) Clean them lightly while rotating the rollers with your finger. Take care not to roughen the surface of the rollers. Take particular care in cleaning the plastic rollers since black debris on the rollers adversely affect the pickup performance. ScanSnap fi-5110EOX2 Operator's Guide 137
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 156
    down the [SCAN] button. As a guideline, six presses of the [POWER] button make the rollers to rotate one full turn. SCAN POWER 1 2 DUPLEX COLOR 1. While holding down the [SCAN] button.... 2. ...press the [POWER] button. ⇒ The rollers rotate. ATTENTION Connect the AC adapter and AC cable only
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 157
    to replace the Carrier Sheet every 500 scans. Refer to "7.4 Purchasing Carrier Sheet" (page 161) for for details on purchasing an Carrier Sheet. 6 Daily Care ScanSnap fi-5110EOX2 Operator's Guide 139
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 158
    140
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 159
    Shock Before you replace the consumables, turn off the scanner and disconnect the AC adapter from the power outlet. 7.1 Replacing Consumables 142 7.2 Replacing the Pad ASSY 144 7.3 Replacing the Pick Roller 147 7.4 Purchasing the Carrier Sheet 153 ScanSnap fi-5110EOX2 Operator's Guide 141
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 160
    and Replacement Cycle of Consumables The following tables list the part numbers of consumables and rough guidelines for replacing these parts. No. Description P/N 1 fi-5110EOX Pad ASSY PA03360-0002 Standard Replacement Cycle 50,000 sheets or one year 2 fi-5110EOX Pick roller PA03360-0001 100
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 161
    consumables referring to "Target value to change supplies" as a rough guideline. For details about purchasing consumables, visit the following website or contact the Fujitsu scanner dealer where you purchased your scanner. [Website] http://scansnap.fujitsu.com/ ScanSnap fi-5110EOX2 Operator's Guide
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 162
    7.2 Replacing the Pad ASSY Replace the Pad ASSY following the procedure below. 1. Remove the documents on the paper chute cover. 2. Open the ADF while pulling the cover open lever. Paper chute cover Cover open lever ADF cover 3. Remove the Pad ASSY. Pull out the Pad ASSY in the direction of the
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 163
    Consumables and Carrier Sheet ATTENTION Make sure that the Pad ASSY is completely attached. Otherwise, document jams or other feeding errors may occur. 5. Close the ADF. Paper chute cover ADF cover ⇒ You should hear the ADF click when it returns to its original position. ScanSnap fi-5110EOX2
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 164
    6. Turn on the scanner. 7. Right click the "ScanSnap Manager" icon on the task bar, and select [Check consum- able supplies...] from the menu. ⇒ This displays the "Check consumable status" window. 8. In the "Check consumable status" window, click the [Reset] button of Pad ASSY Count. ⇒ The counter
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 165
    Replacing Consumables and Carrier Sheet 7.3 Replacing the Pick Roller 7.3 Replacing the Pick Roller Replace the Pick roller following the the sheet guide. Pinch the knobs on the sheet guide and pull the sheet guide to remove it. Sheet guide Handle Claw ScanSnap fi-5110EOX2 Operator's Guide 147
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 166
    Rotate the pick roller bushing (left). Pick roller Pick roller bushing Pick roller shaft 5. Remove the pick roller with its shaft. Hold the left part of the shaft, and raise it to remove the shaft from the scanner while pulling the shaft to the left. Pick roller shaft Pick roller ATTENTION If
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 167
    it up successfully with your fingernail, use a paper clip to push up the pick roller tab. 1 2 7. Attach the new pick roller to the shaft. Insert the shaft aligning the protrusion with the slot on the new pick roller. Shaft Pick roller Slot Protrusion ScanSnap fi-5110EOX2 Operator's Guide 149
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 168
    to the scanner. Insert the right end of the shaft to the roller bushing (right), and set the shaft to the slot while lowering it. Pick roller shaft Pick roller 9. Rotate the roller bushing (left) by rotating it in the direction of the arrow. Pick roller Pick roller bushing Pick roller shaft
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 169
    that the sheet guide is completely attached. Otherwise, document jams or other feeding errors may occur. 11. Close the ADF. Paper chute cover ADF cover ⇒ You should hear the ADF click when it returns to its original position. 12. Turn on the scanner. ScanSnap fi-5110EOX2 Operator's Guide 151
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 170
    13. Right click the "ScanSnap Manager" icon in the task bar, and select [Check consumable supplies...] from the menu. ⇒ This displays the "Check consumable status" window. 14. In the "Check consumable status" window, click the [Reset] button of the consumable you replaced. ⇒ The counter is reset to
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 171
    conspicuous, please replace the Carrier Sheet accordingly. The description of the Carrier Sheet (also sold separately) and part number are as follows: Desciption ScanSnap Carrier Sheet Oty 5 pcs P/N FI-511ES-WW Replacing Consumables and Carrier Sheet ScanSnap fi-5110EOX2 Operator's Guide 153
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 172
    154
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 173
    summarizes the installation specifications of this scanner. Dimensions (Note) Item Minimum Maximum Weight Input power supply Power consumption Temperature/ Humidity Allowable Ranges 11.89 in) 284 (11.18 in) 240 (9.45 in) 480 (18.90 in) 94 (3.70 in) ScanSnap fi-5110EOX2 Operator's Guide 155
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 174
    156
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 175
    Repairs Contact the store where you purchased your ScanSnap or an authorized service provider for performing repairs on this product. • The user must not perform any repairs on the scanner. ScanSnap fi-5110EOX2 Operator's Guide 157
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 176
    158
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 177
    Document Jams 124 Color scanning 55 Compression rate 64 Compression tab 64 Connecting ScanSnap 18 Connecting the AC adapter 18 Connecting the USB Cable 19 Consumables 142 Continue option tab 59 Flow of Operations 24 Folder path to save image 51 ScanSnap fi-5110EOX2 Operator's Guide 159
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 178
    ScanSnap Manager View 102 Pick roller 142 POWER button 4 Power lamp 4 Purchasing ScanSnap Organizer 105 ScanSnap Setup 12 Select application 48 Select color mode 55 Select scanning mode 54 Selecting the file option 59 Setting for text only document 56 Setup 12 Side guide 3 side guide
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 179
    Stacker 3, 36 T Troubleshooting 123 Troubleshooting Checklist 126 U Uninstalling ScanSnap 119 Uninstalling Supplied Programs 120 USB 2.0 7 USB connector 4 Use a fixed password 60 W Weight 30 ScanSnap fi-5110EOX2 Operator's Guide 161
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 180
    162
  • Fujitsu Fi-5110EOX2 | Operating Guide - Page 181
    ScanSnap fi-5110EOX2 Operator's Guide P3PC-1152-02EN Date of issuance: January, 2005 Issuance responsibility: PFU LIMITED z The contents of this manual are subject to change without notice. z PFU LIMITED assumes no liability for incidental or consequential damages arising from the use of this manual
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
P3PC-1152-02EN
SCAN
POWER
DUPLEX
COLOR
Color Image Scanner
fi-5110EOX2
Operator’s Guide
TM