Fujitsu P8020 P8020 User's Guide - Page 69
Removing a Memory Module,
UPC - 611343084116
View all Fujitsu P8020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
1 Turn off power to your LifeBook notebook, and remove any power adapter (AC or auto/airline), battery pack, and modem connection. 2 Place your LifeBook notebook with the bottom facing up on a clean work surface. 3 Remove the two screws from the holes in the memory compartment cover. (Figure 23) Figure 23. Removing the Memory Compartment Cover Removing a Memory Module 1 Perform steps 1 through 3 of Accessing the Memory Compartment. 2 Pull the module clips sideways away from each side of the memory module simultaneously. (Figure 24) 3 While holding the clips out, remove the module from the slot by lifting it up and pulling towards the back of your LifeBook notebook. 4 Store the memory upgrade module in a static guarded sleeve. 5 Install a new memory module as detailed in the procedure below. 6 Replace the memory compartment cover. (Figure 26) 69 - Memory Upgrade Module