Fujitsu S7110 S7110 BIOS Guide - Page 7

Main Menu Drive1 Submenu of the Main Menu The Drive1 submenu allows you to configure secondary ATA devices. Note that actual hard drive label shown may vary. Depending on the drive type, information such as cylinders, heads and sectors may also be displayed. PhoenixBIOS Setup Utility Main Drive1 [MATSHITADVD-RAM UJ-841S] Item Specific Help Type: [Auto] Multi-Sector Transfers: LBA Mode Control: Transfer Mode: Ultra DMA Mode: [Disabled] [Disabled] [Standard] [Disabled] Select ATA/ATAPI drive installed here. [Auto] The BIOS auto-types the drive on boot time. [None] The drive is disabled. F1 Help ESC Exit Select Item -/Space Change Values F9 Setup Defaults ▲ Select Menu Enter Select Sub-Menu F10 Save and Exit Figure 3. Drive1 Submenu Table 3: Fields, Options and Defaults for the Drive1 Submenu of the Main Menu Menu Field Options Default Description Type: ■ Auto ■ None Multi-Sector Transfers: LBA Mode Control: ■ Disabled ■ 2 Sectors ■ 4 Sectors ■ 8 Sectors ■ 16 Sectors ■ Disabled ■ Enabled [Auto] [Disabled] Selects the ATA/ATAPI device type. Select Auto to have the device (CDROM, CD-R/RW, DVD-ROM, etc.) automatically identified by the BIOS at POST. If None is selected, the following Set-up items do not appear. This option cannot be changed when Auto is selected. Specify the number of sectors per block for multiple sector transfer. [Disabled] Enables or disables Logical Block Addressing in place of Cylinder, Head, Sector addressing. This option cannot be changed when Auto is selected. 7