Garmin Alpha 300/300i Owners Manual - Page 11
Charging the Dog Collar Device, Turning On the Device, Selecting a Language, Using the Touchscreen
View all Garmin Alpha 300/300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Charging the Dog Collar Device NOTICE To prevent corrosion, thoroughly dry the contacts on the dog collar device and the surrounding area before connecting the charging clip. NOTE: Your dog collar device may look different than the device pictured. You should fully charge the battery before you use the dog collar device for the first time. Charging a fully depleted battery takes about five hours. 1 Snap the charging clip onto the dog collar device . 2 Plug the small end of the power cable into the USB port on the charging clip. 3 Plug the power cable into a power source. The status LED is solid red when the collar is charging. 4 After the status LED turns solid green, remove the charging clip from the collar. Turning On the Device • On the handheld device, press the power button. • On the dog collar device, hold the power button until the status LED flashes and the collar beeps. Turning Off the Device • On the handheld device, hold the power button until the LCD screen turns off. • On the dog collar device, hold the power button until the status LED turns solid red. Selecting a Language When you turn on your device for the first time, you will select the device language from a list of available languages. You can change the language setting from the System settings. 1 From the main menu, select > System > Language. 2 Select a language. Using the Touchscreen • Select to open a menu. • Select to return to the home screen. • Select to return to the previous page. • If you are more than one menu away from the home screen, select and hold to return to the home screen. • If scroll controls are enabled, select and to scroll (Accessibility Settings, page 37). Getting Started 5