Garmin G3X Pilots Guide - Page 113
ENG Softkeys (Example Configuration), 3.2 Lean Assist Mode (Optional), Using Lean Assist Mode
View all Garmin G3X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
System Overview Flight Instruments EIS CNS Interface GPS Navigation EIS ENG PAGE SOFTKEYS (EXAMPLE CONFIGURATION) NOTE: The Engine (ENG) Page softkeys displayed are dependant on the configuration. Refer to the G3X Installation Manual for information on configuring the Engine Page. If the Engine Page information configured exceeds one page, additional engine gauges may be distributed among the 1st, 2nd, and 3rd softkeys as required. (optional) (optional) XXXX XXXX XXXX (optional) (optional) LEAN FUEL MAIN, TEMPS AUX, AUX1, AUX2, ELEC, TRIM, TEMPS LEAN FUEL Displays engine gauges as required (optional) Displays additional engine gauges as required (optional) Activates/deactivates Lean Assist (optional) Displays Fuel Calculator (optional) 3.2 LEAN ASSIST MODE (OPTIONAL) NOTE: The pilot should follow the engine manufacturer's recommended leaning procedures as described in the Pilot's Operating Handbook (POH). A LEAN Softkey is displayed on the ENG Page if Lean Assist Mode is enabled and at least one Exhaust Gas Temperature (EGT) or Turbine Inlet Temperature (TIT) input is configured (refer to the G3X Installation Manual for more information). Using Lean Assist Mode: From the ENG Page, press the LEAN Softkey. As the mixture is leaned, one of the cylinders' exhaust temperature will peak. Continuing to lean the mixture will cause each additional cylinder to peak (if applicable) until the last of the cylinders peaks. To cancel Lean Assist Mode, press the LEAN Softkey again. Flight Planning Hazard Avoidance Additional Features Integrated Autopilot Annun/Alerts Appendix Index 190-01115-00 Rev. F Garmin G3X Pilot's Guide 95