Garmin GDL 69/69A SXM Activation Instructions - Page 17
G500/g600 Activation
View all Garmin GDL 69/69A SXM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
4 G500/G600 ACTIVATION The G500/G600 must be configured to accept information from a GDL 69 Series unit in accordance with G500 AML STC Installation manual or G600 AML STC Installation Manual. The complete activation process may take over 45 minutes, depending on the demands of the SiriusXM activation system. Do not cycle or remove power from the units during the activation process. It is recommended that the aircraft is outside and away from metallic structures. For activation, you will need the SiriusXM Radio ID(s) and your billing information. The SiriusXM Radio IDs are located on the XM Information page (see figure 4-1) and on the back page of this document. NOTE GDL 69/69A units have separate Data and Audio Radio IDs, and will not function correctly with both audio and data services activated under one ID. GDL 69 SXM receivers use one Radio ID for both data and audio services. 4.1 Activation Steps 1. Ensure the aircraft's SiriusXM antenna has an unobstructed view of the southern sky. 2. Connect aircraft to external power source if available. 3. Power on the avionics and allow the G500/G600 system and the GDL 69 Series unit to power up. 4. Turn the large MFD knob clockwise to the AUX group. Turn the small MFD knob to the XM Information page. GDU 620 SW Version 6.21 or earlier GDU 620 SW Version 7.00 or later Figure 4-1 XM Information Page 190-00355-04 Rev. L GDL 69/69A SiriusXM Satellite Radio Activation Instructions Page 4-1