Garmin GHP 10V Marine Autopilot System Installation Instructions - Page 1
Garmin GHP 10V Marine Autopilot System Manual
View all Garmin GHP 10V Marine Autopilot System manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
GHP™ 10V Installation Instructions To obtain the best possible performance and to avoid damage to your boat, install the Garmin® GHP 10V marine autopilot system according to the following instructions. Professional installation of the autopilot system is highly recommended. The GHP 10V is compatible with C3 or newer Volvo® EVC systems. Contact Volvo for more information on updating older EVC systems. Read all installation instructions before proceeding with the installation. If you experience difficulty during the installation, contact Garmin Product Support. NOTE: There is an installation checklist on the last page of these instructions. Remove the last page and refer to the checklist as you proceed through the GHP 10V installation. Registering Your Device Help us better support you by completing our online registration today. • Go to http://my.garmin.com. • Keep the original sales receipt, or a photocopy, in a safe place. For future reference, write the serial number assigned to each component of your GHP 10V system in the spaces provided on page 3. The serial numbers are located on a sticker on each component. Important Safety Information Warnings You are responsible for the safe and prudent operation of your vessel. The GHP 10V is a tool that will enhance your capability to operate your boat. It does not relieve you from the responsibility of safely operating your boat. Avoid navigational hazards and never leave the helm unattended. Always be prepared to promptly regain manual control of your boat. Learn to operate the GHP 10V on calm and hazard-free open water. Use caution when operating the GHP 10V near hazards in the water, such as docks, pilings, and other boats. See the Important Safety and Product Information guide in the product box for product warnings and other important information. caution Equipment to be connected to this product should have a fire enclosure or be provided with a fire enclosure. Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. Notice When drilling or cutting, always check the opposite side of the surface. Be aware of fuel tanks, electrical cables, and hydraulic hoses. Contacting Garmin Contact Garmin Product Support if you have any questions while using your GHP 10V. In the USA, go to www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or (800) 800.1020. In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000. In Europe, go to www.garmin.com/support and click Contact Support for in-country support information, or contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241. GHP 10V Installation Instructions 1