Garmin GLO for Aviation Instructions - Page 2

Installing the Battery  Warning This product contains a lithium-ion battery. See page 5 for important battery safety information. 1 With your thumbnail, slide the battery cover release tab ➊. ➋ ➌➊ 2 Remove the battery cover ➋. 3 Locate the metal contacts on the end of the lithium-ion battery. 4 Insert the battery ➌ so the metal contacts on the battery align with the metal contacts inside the battery compartment. 5 Press the battery down into place. 6 Insert the battery cover into the notches and press down. The release tab locks the cover in place. Replacement Battery You can purchase a replacement battery (010-10840-00) at http://buy.garmin.com. Charging the Battery You can use the sensor while you are charging it. 1 Plug the small end of the power cable into the mini-USB connector on the end of the sensor. 2 Plug the other end of the power cable into an appropriate source of power for the cable type. It takes about three hours to charge the battery. A fully charged battery lasts about 12 hours. Note: If the battery has not been charged for a long period of time, remove the battery, connect the cable to the device and a power source, and then replace the battery. The battery will charge as usual. 2