Garmin GMI 10 Digital Marine Instrument Display Installation Instructions, S/N - Page 4
Notes, Creating a Basic NMEA 2000 Network, Connecting the GMI 10 to an Existing, NMEA 2000 Network
View all Garmin GMI 10 Digital Marine Instrument Display manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
GMI 10 NMEA 2000 device (not included) T-connector (included) NMEA 2000 device (not included) Drop cable (included) Existing NMEA 2000 network Connecting the GMI 10 to an Existing NMEA 2000 Network Ignition or in-line switch Fuse + - 12 Vdc battery Power cable T-connectors Female terminator Drop cable NMEA 2000 device (not included) Additional drop cable and T-connector (not included) Male terminator Creating a Basic NMEA 2000 Network Notes: • To add additional sensors to your NMEA 2000 network, follow the instructions included with the sensor. • To learn more about NMEA 2000 and building a NMEA 2000 network, visit www.garmin.com. • The GMI 10 is powered by the NMEA 2000 network. GMI 10 Installation Instructions
³
GMI 10 Installation Instructions
Creating a Basic NMEA 2000 Network
+
-
Drop cable
Male
terminator
T-connectors
Female
terminator
Power cable
Ignition or
in-line switch
1± Vdc battery
Fuse
NMEA ±000
device
(not included)
Additional
drop cable and
T-connector
(not included)
Connecting the GMI 10 to an Existing
NMEA 2000 Network
Drop cable
(included)
T-connector
(included)
NMEA ±000
device
(not included)
NMEA ±000
device
(not included)
GMI 10
Existing NMEA ±000 network
Notes:
To add additional sensors to your NMEA2000 network, follow the instructions included with the sensor.
To learn more about NMEA 2000 and building a NMEA 2000 network, visit
www.garmin.com
.
The GMI 10 is powered by the NMEA 2000 network.
•
•
•