Garmin GMR 1226 xHD2 Open Array Radar and Pedestal Flush Mount Template - Page 1

Printing a Mounting Template Notice It is not recommended that you print a mounting template on your own. Use the template that came in the product box. If you do print the template, you must follow these instructions for printing a mounting template precisely. To print large templates, you need large enough paper and printer. Failure to have the correct sized paper and printer, or a failure to follow these instructions, may result in an incorrectly sized template and therefore an incorrect cutout (too large or too small) on the mounting surface of your boat. 1 Select File > Print. ➎ ➌ ➍ ➊ ➋ 2 Select None for Page Scaling ➊. 3 Ensure the check mark is next to Auto-Rotate and Center ➋. 4 Drag the arrow ➌ to the right, to view page 2 in the window below. 4 Verify that the paper size is larger than the template ➍. In this example, the paper is not larger than the template. 5 If the paper size is not large enough, select Properties ➎ and select a Page Size that is larger than the template. Notice Garmin is not responsible for any damages or expenses resulting from a miscut mounting surface arising from a failure to follow these instructions.