Garmin GNX 130 10-inch Large Format Marine Instrument Owner s Manual - Page 5
Introduction, Profiles, Instrument s
View all Garmin GNX 130 10-inch Large Format Marine Instrument manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Device Overview NOTE: Certain functions are available only when the appropriate sensors are connected to the device. The marine instrument allows you to view data sources from sensors through a NMEA 2000® network. Although the instrument cannot directly receive NMEA® 0183 data, it can display NMEA 0183 data from sources connected to a GNX 20 or GNX 21 device (sold separately) on the same NMEA 2000 network. The instrument can also receive data from Nexus® instruments and sensors using a GND™ 10 device (sold separately). information, bearing to waypoint, distance to the next waypoint, true wind angle, and depth. SAIL RACE: This profile displays instruments useful when racing in a sailboat. Available default instruments include GPS speed information, true wind speed, true wind angle, heading, bearing to waypoint, and distance to the next waypoint. CUSTOM: This profile allows you to customize the page to display instruments useful to your specific boating needs. The default page displays speed over ground information. Selecting a Profile 1 Select > SETUP > PROFILES. 2 Select a profile. Restoring Profiles to their Default Settings You can restore profiles to their factory default settings. 1 Select > SETUP > PROFILES > RESET DEFAULTS. 2 Select CURRENT PROFILE or ALL PROFILES. Instrument Pages Select to return to the previous menu or to the instrument page. Select to view the menu for an instrument page. or Select to scroll through instrument pages and menus. Select to view the display settings. Select twice to view the backlight settings. Hold to view the power-off settings. Unlocking the Controls After one minute, the controls on the device lock automatically. This feature reduces accidental button pushes caused by water splashes or droplets. When locked, the icon appears when you select a key on the device. NOTE: You can select SETUP > TOUCH KEY LOCK to disable the device lock feature. Hold both and at the same time. The icon disappears when the controls are unlocked. Profiles Profiles are collections of instrument pages that can be customized. Profiles can be made up of instrument pages that display similar data, such as GPS speed information and GPS course information. During the initial setup, you can select a preset profile, or you can create a custom profile. You can select a different profile at any time. POWERBOAT: This profile displays instruments useful when in a powerboat. Available default instruments include GPS speed information, GPS course information, depth, bearing to waypoint, distance to the next waypoint, and water temperature. SAIL CRUISE: This profile displays instruments useful when cruising in a sailboat. Available default instruments include true wind speed, GPS speed information, GPS course Cycling Through Instrument Pages From any instrument page, select or . Using Auto Scroll You can use auto scroll to automatically cycle through all of the instrument pages. 1 Select > SETUP > AUTO SCROLL. 2 Select an option: • Select AUTO SCROLL to turn auto scroll on or off. • Select AUTO SCROLL INTERVAL to adjust how long each instrument page is shown. Adding an Instrument Page You can create a custom page. You can add up to three instruments from instrument collections to display on a custom page. 1 Select > ADD/REMOVE PAGE > ADD PAGE. 2 Select ONE FUNCTION, TWO FUNCTION, or THREE FUNCTION. 3 Select an instrument page collection. 4 Select a number. 5 If necessary, select an empty function. 6 Select or to scroll through the instrument pages. 7 Select an instrument page to add. Removing an Instrument Page 1 Select the instrument page to remove. 2 Select > ADD/REMOVE PAGE > REMOVE PAGE. 3 Select YES. Changing the Layout of Instrument Pages NOTE: You can change the layout of an instrument page to display up to three fields of data from connected instruments. 1 From the instrument page you need to change, select > EDIT CURRENT PAGE > CHANGE LAYOUT. 2 Select the number of fields to show on the instrument page. 3 Select the field to change. 4 Select a category. 5 Select the data to show in the field. Introduction 1