Garmin GPSMAP 5008 Owner's Manual

Garmin GPSMAP 5008 - Marine GPS Receiver Manual

Get Garmin GPSMAP 5008 - Marine GPS Receiver PDF manuals and user guides
UPC - 753759066079
View all Garmin GPSMAP 5008 manuals
Add to My Manuals
Save this manual to your list of manuals

Garmin GPSMAP 5008 manual content summary:

  • Garmin GPSMAP 5008 | Owner's Manual - Page 1
    GPSMAP® 4000/5000 Series owner's manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 2
    consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products. Garmin®, the Gamin logo, GPSMAP
  • Garmin GPSMAP 5008 | Owner's Manual - Page 3
    the Chart Settings: page 9. • Navigating to a Destination: page 21. • Creating a Waypoint: page 23. • Configuring System Settings: page 32. • Using Radar: page 39. • Using Sonar: page 45. • Digital Selective Calling: page 49. • Alarms and Messages: page 55. GPSMAP® 4000/5000 Series Owner's Manual 
  • Garmin GPSMAP 5008 | Owner's Manual - Page 4
    (DSC 49 Using the Chartplotter with a VHF Radio.......49 Adding a DSC Contact 49 Viewing the DSC List 50 Receiving Distress Calls 50 Man- Garmin 57 Declaration of Conformity (DoC 57 Software License Agreement 57 NMEA 0183 and NMEA 2000 58 Index 59 ii GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 5
    keypad (GPSMAP 4010 and 4012) GPSMAP 4012 SD card slot Note: Use the soft keys to select menu items on the GPSMAP 4000 Series. Touch menu items on the GPSMAP 5000 Series screen to select them. POWER Automatic backlight sensor GPSMAP 5008 SD card slot GPSMAP® 4000/5000 Series Owner's Manual 
  • Garmin GPSMAP 5008 | Owner's Manual - Page 6
    Getting Started Getting Started NMEA 2000 connector Garmin Marine Network connectors Power connector Marine video connector NMEA 0183 connector Turning the Unit On or Off . Units-specify units for on screen measurements as Statute, Metric, or Nautical.  GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 7
    screen are green . When the unit loses satellite signals, the green bars disappear and the position icon shows a flashing question mark. For more information about GPS, visit the Garmin® Web site at www.garmin.com/aboutGPS. GPSMAP® 4000/5000 Series Owner's Manual 
  • Garmin GPSMAP 5008 | Owner's Manual - Page 8
    chartplotter. You may need this information to update the system software or to purchase additional map data information. From the Home screen, select Configure > System > System Information. Using Simulator Mode Simulator Mode turns the GPS receiver date.  GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 9
    additional hardware to your Garmin Marine Network, additional options appear. GPSMAP 4000 Series Home Screen GPSMAP 5000 Series Home Screen • Charts-access Navigation Chart, Perspective 3D, Mariner's Eye 3D, Fish Eye 3D, Fishing Charts and Radar Overlay (page 6). Note: Mariner's Eye 3D, Fish Eye
  • Garmin GPSMAP 5008 | Owner's Manual - Page 10
    Marine services Your boat Submerged wreck Exposed wreck Beacon Buoy Zoom scale Navigation Chart with BlueChart g2 Vision Data Zooming In and Out on the Map The RANGE (+/-) keys (GPSMAP 4000 series) or the and keys (GPSMAP 5000 series settings (page 9).  GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 11
    Chart, or Radar Overlay. 3. Select GPSMAP 4000 series), or touch and drag the Navigation screen (GPSMAP 5000 series). Pointer coordinates Pointer distance and bearing from current location Map pointer Pan options Inset map To stop panning, select Stop Panning. GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 12
    services information near the pointer location. Accessing Additional Object Information Use the map pointer ( ) (GPSMAP 4000 series) or touch an item on the screen (GPSMAP 5000 series tide-station icon ( ), and select Review to view a detailed tide graph.  GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 13
    /Currents-turns the display of tides and currents on or off (page 27). Service Points-turns the display of marine service points on or off. Roses-displays a compass rose around your boat, indicating True and Apparent wind speed and wind angle. Data bars GPSMAP® 4000/5000 Series Owner's Manual 
  • Garmin GPSMAP 5008 | Owner's Manual - Page 14
    Charts Understanding How Wind VMG and Waypoint VMG Are Displayed in the Data Bars The chartplotter automatically switches between displaying Wind Velocity Made Good (VMG) and Waypoint VMG in the the display of land POIs (points of interest) on or off. 10 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 15
    details about navaids such as beacons, lights, and obstructions: 1. Use the ROCKER (GPSMAP 4000 series) or the touchscreen (GPSMAP 5000 series) to point to the navaid. When the cursor is over the navaid, a System) or DSC (Digital Selective Calling) device. GPSMAP® 4000/5000 Series Owner's Manual 11
  • Garmin GPSMAP 5008 | Owner's Manual - Page 16
    affect automatic guidance (Guide To). Using Radar Overlay When you connect your chartplotter to an optional Garmin marine radar, you can use Radar Overlay to overlay radar information on the Navigation On. A trailing line on the chart indicates your track. 12 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 17
    line on the screen. To edit or delete a saved track: 1. From the Home screen, select Information > User Data > Tracks > Saved Tracks. 2. Select the track you want to edit or delete. 3. Select Edit points. • Time-records the track based on a time interval. GPSMAP® 4000/5000 Series Owner's Manual 13
  • Garmin GPSMAP 5008 | Owner's Manual - Page 18
    the SD card on BlueChart g2 Vision-compatible Garmin GPS units. Using Mariner's Eye 3D A BlueChart g2 Vision SD card offers Mariner's Eye 3D, which provides a detailed routes in unfamiliar harbors or anchorages. Mariner's Eye 3D 14 Navigation Chart GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 19
    scale. Blue indicates deep water, yellow is shallow water, and red is very shallow water. Mariner's Eye 3D, Hazard Colors Off Mariner's Eye 3D, Hazard Colors On For settings and options related to Range Rings, Safe Depth, and Lane Width, see page 12. GPSMAP® 4000/5000 Series Owner's Manual 15
  • Garmin GPSMAP 5008 | Owner's Manual - Page 20
    Cone-turns a cone that shows the area covered by your transducer on or off. Sonar Data-visually shows the sonar readings received by your transducer for the best combination of sonar and mapping. Tracks-turns the the chart. Fishing Chart 16 Navigation Chart GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 21
    images in your BlueChart g2 Vision region, zoom in using the RANGE (+) key (GPSMAP 4000 series) or touch (GPSMAP 5000 series). You can also try setting the detail level higher. Photo Overlay Off Land Only Photo Overlay Blend at 50% Blend at 100% GPSMAP® 4000/5000 Series Owner's Manual 17
  • Garmin GPSMAP 5008 | Owner's Manual - Page 22
    , and more. For instructions on searching for, and navigating to, these POIs, see the "Where To?" section (page 21). Using Automatic Guidance Automatic Guidance automatically suggests routes based on available BlueChart g2 Vision chart information. 18 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 23
    Data fields Focus screen (GPSMAP 4000 series) Navigation Chart, Radar, and Sonar Combination (GPSMAP 4000 series) Select to switch focus screen (GPSMAP 4000 series only) To access additional settings or options for the Combinations screen, select Menu. GPSMAP® 4000/5000 Series Owner's Manual 19
  • Garmin GPSMAP 5008 | Owner's Manual - Page 24
    4000 series) or touch a data field (GPSMAP 5000 series). Select the item to be displayed. To change the layout to horizontal or vertical: 1. While viewing the Combinations screen, select Menu > Change Combination. 2. Select Layout Vert. or Layout Horiz. 20 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 25
    To? option on the Home screen to search for, and navigate to, waypoints, routes, and services such as nearby fuel, repairs, and ramps. Note: You must create waypoints and routes before you view additional information or to display the location on a chart. GPSMAP® 4000/5000 Series Owner's Manual 21
  • Garmin GPSMAP 5008 | Owner's Manual - Page 26
    Search - GPSMAP 5000 series 3. Select Done to view the 50 nearest destinations that contain your search criteria. 4. Select the best location, then select Navigate To > Go To or Route To (or Guide To when using a preprogrammed BlueChart g2 Vision card). 22 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 27
    with an international MOB symbol is created, and the unit is on an active navigation to that point. 1. At any time, press the MARK key (GPSMAP 4000 series) or touch Mark (GPSMAP 5000 series). 2. Select Man Overboard. GPSMAP® 4000/5000 Series Owner's Manual 23
  • Garmin GPSMAP 5008 | Owner's Manual - Page 28
    4000 series) or touch the waypoint (GPSMAP 5000 series) to highlight the waypoint on the Navigation chart. OR From the Home screen, select Information > User Data > Waypoints. 2. Select the waypoint or MOB you want to delete. 3. Select Review > Delete. 24 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 29
    User Data > Routes > New Route > Use Chart. 2. Select Use Chart or Use Waypoint List. 3. If you selected Use Chart, use the map pointer ( ) (GPSMAP 4000 series) or touch the location (GPSMAP 5000 series . Repeat until the route is complete. 6. Select Done. GPSMAP® 4000/5000 Series Owner's Manual 25
  • Garmin GPSMAP 5008 | Owner's Manual - Page 30
    with a Garmin Autopilot When you start any type of navigation (Go To, Route To, Guide To, or Follow Track), if you are connected to a compatible Garmin autopilot (such as a Garmin GHP™ 10), you will be prompted to engage the autopilot. Where To? 26 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 31
    screen to access information about tides, currents, celestial data, user data, other boats, gauges, and video. Viewing Tide Station Manual to view current information for a different date. Select Show Report to view the Current Report for the selected station. GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 32
    the drive for the SD card reader and the types of data you want to copy to your chartplotter. 6. Click Send. 7. Insert the SD card into your chartplotter. 8. From the Home screen on your chartplotter, select Information > User Data > Data Transfer > Card. 28 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 33
    data to a computer: 1. Insert an SD card into the SD card slot on the front of the unit. 2. From the Home screen, select Information > User Data > Data Transfer > Card > Save To Card. 3. Complete one of the following: • Select the file name from the list. GPSMAP® 4000/5000 Series Owner's Manual 29
  • Garmin GPSMAP 5008 | Owner's Manual - Page 34
    Series Installation Instructions for details. To select analog or digital gauges: 1. To view analog or digital engine gauges from the Home screen, select Information > Dashboard Gauges > Engine > Menu. 2. Select Analog or Digital. Viewing Information 30 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 35
    sensor, such as the Garmin GFS™ 10. To GPS Speed or Water Speed (using data from a speed wheel) for the fuel economy calculation. Viewing Video Your unit can display video if you connect it to a video source using the supplied video cable. See the GPSMAP 4000/5000 Series Installation Instructions
  • Garmin GPSMAP 5008 | Owner's Manual - Page 36
    Sources-specify the sensor used for Wind numbers and Fuel Economy. Touch Wind or Fuel Economy to toggle between Water (from a water-speed sensor) and GPS (from the calculated GPS speed). Configuring the Chartplotter 32 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 37
    Chartplotter Note: You must be receiving NMEA sonar depth data or using a Garmin User Mag reset NMEA 0183 settings to their default settings (OK or Cancel). • Diagnostics-a tool used by installers to verify that NMEA 0183 data is being sent across the system. GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 38
    sound. If you have Activation set to Distance, select Change Distance to set the distance before arrival that the alarm should sound. Use the ROCKER (GPSMAP 4000 series) or onscreen keyboard (GPSMAP 5000 series) to change the time or distance. 34 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 39
    the battery reaches a user-determined low voltage. GPS Accuracy-set an alarm to sound when the GPS location accuracy falls outside transducer connected to the sounder module) wired through NMEA 0183 or connected to the Garmin Marine Network to receive sonar GPSMAP® 4000/5000 Series Owner's Manual 35
  • Garmin GPSMAP 5008 | Owner's Manual - Page 40
    turns freely, check the cable connections. If you continue to get the message, contact Garmin Product Support. Fuel Capacity-enter the total fuel capacity of your boat. Configuring Other Vessels To configure time interval (ranging from 1 to 24 minutes). 36 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 41
    . You can connect your GPSMAP 4000 series and GPSMAP 5000 series chartplotters, and previous Garmin Marine Network compatible chartplotter models (GPSMAP 3005/3006/3010), to your network to share data. With the Garmin Marine Network, you can: • Share GPS data from a GPS 17 antenna that is wired to
  • Garmin GPSMAP 5008 | Owner's Manual - Page 42
    to one of the devices for identification purposes, select the device and then select Review. Use the ROCKER (GPSMAP 4000 series) or the onscreen keyboard (GPSMAP 5000 series) to name the device. Select Back or press the HOME key to exit. Marine Network 38 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 43
    a few moments, then the radar begins painting an image. To turn off the radar: 1. Press and release the Power key on the chartplotter (do not hold the button, or you may shut down the chartplotter), or select Menu. 2. Select Radar to Standby. Using Radar GPSMAP® 4000/5000 Series Owner's Manual 39
  • Garmin GPSMAP 5008 | Owner's Manual - Page 44
    the guard zone from the Radar screen, select Menu > Sentry Setup > Enable Guard Zone. To adjust the guard zone boundaries: 1. While the guard zone is on, from the Radar screen, select Menu > Sentry Setup > Adjust Guard Zone > Move Guard Zone. Using Radar 40 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 45
    HDM or HDG. Drop VRM/EBL-sets the Variable Range Marker (VRM) and Electronic Bearing Line (EBL) to measure range and bearing to a target. Using Radar GPSMAP® 4000/5000 Series Owner's Manual 41
  • Garmin GPSMAP 5008 | Owner's Manual - Page 46
    for the gain, Auto, adjusts the gain automatically to provide the best performance. To adjust the gain: 1. Select Menu > Gain on the radar screen. 2. Select Up or Down to manually adjust the gain; select Auto to return the gain to the default setting. 42 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 47
    trail for a DSC vessel is displayed on the Radar screen, or display a list of tracked DSC vessels. Collision Alarm (AIS and MARPA only)-turn a safe zone around your boat on or off. This is used for collision avoidance, and can be customized. Using Radar GPSMAP® 4000/5000 Series Owner's Manual 43
  • Garmin GPSMAP 5008 | Owner's Manual - Page 48
    that indicates the route you are currently navigating. • Waypoints-show or hide waypoints that are within the range displayed on the Radar screen. Select Navigation Only to only display waypoints associated with the currently active route. Using Radar 44 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 49
    graph and a zoomed-in portion on the same screen. From the Home screen, select Sonar > Split Zoom. Depth, temperature, and water speed Zoomed depth scale GPS speed and GPS heading Zoom level Zoom Range window Transducer frequency Using Sonar GPSMAP® 4000/5000 Series Owner's Manual 45
  • Garmin GPSMAP 5008 | Owner's Manual - Page 50
    , temperature, and water speed GPS speed and GPS heading Range Transducer frequencies Understanding the Temp Log If you are using a temperature-capable transducer, the Temp Log screen keeps scrolls to the left as information is received. Using Sonar 46 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 51
    the strongest signal from the bottom to help identify its hardness or softness. • Off (default)-Whiteline is disabled. • transducer is capable, the data is shown. A-Scope-creates a vertical flasher along the right side of the screen (On or Off). Using Sonar GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 52
    drag the line (GPSMAP 5000 series) to set the depth of the reference line. Range-the range of the depth scale on the right side of the screen (Auto, or to adjust manually, Up or Down). Sonar Setup-opens the Sonar Setup screen. See page 47. Using Sonar 48 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 53
    4000 series) or onscreen keyboard (GPSMAP 5000 series) to enter the MMSI number of the vessel and select Done. 3. Use the ROCKER or the onscreen keyboard to enter the name of the vessel and select Done. The contact is now available in the DSC List. DSC GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 54
    is sent. When you receive a DSC distress call: 1. Select Review to view details about on the radio, the chartplotter screen prompting you to Garmin VHF Radio Owner's Manual. For information on activating navigation to a man-overboard location, see page 23. 50 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 55
    trail lines off for tracked vessels: 1. From a chart screen, select Menu > Other Vessels > DSC > DSC Trails. 2. Select Off to turn trails off for every vessel. GPSMAP® 4000/5000 Series Owner's Manual 51 DSC
  • Garmin GPSMAP 5008 | Owner's Manual - Page 56
    Review > Call with Radio. 4. Select Send to send the information about the call to the radio. 5. On your Garmin VHF radio, select Call. Calling an AIS Target When you connect your Garmin chartplotter to a Garmin On your Garmin VHF radio, select Call. DSC 52 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 57
    channel WAAS-capable receiver Acquisition Times: Warm: 15 seconds Cold: 45 seconds AutoLocate: 2 minutes Update Rate: 1/second, continuous GPS Accuracy: Position:
  • Garmin GPSMAP 5008 | Owner's Manual - Page 58
    chartplotter and insert it into an SD card reader that is attached to a computer. 2. From Windows Explorer, open the Garmin\scrn folder on the SD card. 3. Copy the appropriate .BMP file on the card and paste it to any location on the computer. Appendix 54 GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 59
    sensor/transducer) the water temperature is inside the userdefined target temperature zone. GPS Antenna Has Lost Its Stored Settings-The GPS antenna memory has been cleared. Contact Garmin Product Support. GPS Service Incompatible. Software Update Required-a GPS service software update is
  • Garmin GPSMAP 5008 | Owner's Manual - Page 60
    detected in the user-defined radar guard zone. Radar Needs Repair Error Code-(radar) the radar needs repair. An error code will be listed to help diagnose the error. Radar Service Incompatible. Software Update Required-a radar software update is needed. Contact Garmin Product Support for assistance
  • Garmin GPSMAP 5008 | Owner's Manual - Page 61
    http://my.garmin.com. Keep the original sales receipt, or a photocopy, in a safe place. Contact Garmin Contact Garmin Product Support if you have any questions while using your GPSMAP 4000 series or GPSMAP 5000 series chartplotter. In the USA, go to www.garmin.com/support, or contact Garmin USA by
  • Garmin GPSMAP 5008 | Owner's Manual - Page 62
    series chartplotters can receive data from up to four NMEA 0183-compliant devices and send GPS data to up to six NMEA 0183-compliant devices. To wire a GPSMAP 4000 or GPSMAP 5000 series chartplotter to optional NMEA 0183-compliant devices, see the GPSMAP 4000/5000 Series Installation Instructions
  • Garmin GPSMAP 5008 | Owner's Manual - Page 63
    GMR 18 37, 39 GMR 21/41 37 GMR 404/406 37, 39 go to 21 GPS satellite signals 3, 32 GSD 22 37 guide to 21 H Hazard Colors 15 heading 33 Heading Line 10 GPSMAP® 4000/5000 Series Owner's Manual Index heading line 11 cruising screen 44 Head Up 10 high-resolution satellite imagery 17 home
  • Garmin GPSMAP 5008 | Owner's Manual - Page 64
    keys 1 Range Rings 12 registration 57 restoring factory settings 4 review 8 rings 9, 44 roads 18 Rocker 1 Roses 9 routes 22 Service Points 9 settings alarms 34 chart 9 combinations 20 communications 33 fish eye 3D 16 initializing 2 mariner's GPSMAP® 4000/5000 Series Owner's Manual
  • Garmin GPSMAP 5008 | Owner's Manual - Page 65
  • Garmin GPSMAP 5008 | Owner's Manual - Page 66
  • Garmin GPSMAP 5008 | Owner's Manual - Page 67
  • Garmin GPSMAP 5008 | Owner's Manual - Page 68
    For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com. © 2009 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd. Liberty
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
GPSMAP
®
4000/5000 Series
owner’s manual