Garmin GTN 650 Pilot's Guide Errata 1
Garmin GTN 650 Manual
 |
View all Garmin GTN 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Garmin GTN 650 manual content summary:
- Garmin GTN 650 | Pilot's Guide Errata 1 - Page 1
made to the GTN Pilot's Guides since printing and are described below. GTN 625/635/650 and GTN 725/750 Pilot's Guides The following note was added on page 9-18 in the GTN 725/750 Guide and on page 8-15 in the GTN 625/635/650 Guide: NOTE: The term "intersection range" means any GPS waypoint included - Garmin GTN 650 | Pilot's Guide Errata 1 - Page 2
selections, touch the Create key to create the new waypoint. GTN 725/750 Pilot's Guide The following note was added on pages 4-1, 6-1, and system. The absence of a chart for a particular Departure, Arrival, or Approach does not preclude its availability or inclusion in 2 Garmin GTN Pilot's Guide - Garmin GTN 650 | Pilot's Guide Errata 1 - Page 3
are auto-loaded in the system when the Chart page is service. - Terrain/TAWS to a configuration problem configuration is invalid. with the GTN. This message GTN needs service. will be accompanied by a TER FAIL annunciation. 190-01007-09 Rev. A 190-01007-09_0A.indd 3 Garmin GTN Pilot's Guide - Garmin GTN 650 | Pilot's Guide Errata 1 - Page 4
system. (VOR, LOC, GPS). Contact dealer for service. 16-15 STORMSCOPE StormScope is inoperative or connection to GTN is lost. The GTN is configured for a Contact dealer for service. WX-500 StormScope but is not receiving data from it. 4 190-01007-09_0A.indd 4 Garmin GTN Pilot's Guide Errata
-
1 -
2 -
3 -
4
 |
 |
1
190-01007-09
Rev. A
Garmin GTN Pilot’s Guide Errata 1
GTN PILOT GUIDE ERRATA 1
Several corrections have been made to the GTN Pilot’s Guides since printing and are
described below.
GTN 625/635/650 and GTN 725/750 Pilot’s Guides
The following note was added on page 9-18 in the GTN 725/750 Guide and on page 8-15
in the GTN 625/635/650 Guide:
NOTE:
The term “intersection range” means any GPS waypoint included in
the navigation database, and includes waypoints that may not be intersections
of two VOR radials.
The following note was added on page 4-19 in the GTN 725/750 Guide and on page 4-16
in the GTN 625/635/650 Guide:
NOTE:
Certain leg types (such as approach) or leg geometries (changes in
desire track greater than 120 degrees), combined with large offset values do
not support parallel track. Default direction and offset values may result in
the status indicating that parallel track is not supported. The user must enter
the desired parallel track offset and distance to determine whether that flight
plan, combined with the offset and distance, support parallel track.
The following note was added on page 16-18 in the GTN 725/750 Guide and on page 15-19
in the GTN 625/635/650 Guide:
NOTE
:
Upon crossfill being activated, the GTNs may take up to 10 seconds
to crossfill the flight plans. The pilot must verify the flight plan in each unit
prior to use.
The following note was added on page 15-10 in the GTN 725/750 Guide and on page 14-9
in the GTN 625/635/650 Guide:
NOTE
:
When a count up timer is used, the preset value has no function.
The following note was added on page 9-3 in the GTN 725/750 Guide and on page 8-3 in
the GTN 625/635/650 Guide:
NOTE:
Changes made in the Map Menu take effect immediately on the map
display.
The following instructions modified the
Waypoint Location Based on Lat/Lon Coordinates
on page 8-18 in the GTN 725/750 Guide and on page 7-16 in the GTN 625/635/650 Guide:
1.
From the Create User Waypoint page, touch the
Position Type
key
and then the
Lat/Lon
key. Then, touch the
Latitude/Longitude
value
key.
190-01007-09_0A.indd
1
3/1/2011
2:21:12 PM