Garmin GTX 330 Pilot's Guide - Page 6
Pressure, Flight Time, Altitude Monitor, Oat/dalt, Count Up Timer, Count Down Timer, Contrast,
View all Garmin GTX 330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Function Display NOTE: GTX 330 options are normally set at time of installation. For changes to the GTX 330 parameters, contact your Garmin authorized dealer. PRESSURE: ALT: Displays the altitude data supplied to the GTX 330 in feet, hundreds of feet (i.e., flight level), or meters (dependent upon installation configuration). FLIGHT TIME: Timer start is configured as either Manual or Automatic. When Manual, displays the Flight Time, controlled by the START/ STOP and CLR keys. When Automatic, the timer begins when take off is sensed. ALTITUDE MONITOR: Controlled by START/STOP key. Activates a voice alarm and warning annunciator when altitude limit is exceeded. OAT/DALT: Displayed when the GTX 330 is configured with temperature input. Displays Outside Air Temperature and Density Altitude. COUNT UP TIMER: Controlled by START/STOP and CLR keys. COUNT DOWN TIMER: Controlled by START/STOP, CLR, and CRSR keys. The initial Count Down time is entered with the 0 - 9 keys. CONTRAST: This page is only displayed if manual contrast mode is selected during installation configuration. Contrast is controlled by the 8 and 9 keys. DISPLAY: This page is only displayed if manual backlighting mode is selected during installation configuration. Backlighting is controlled by the 8 and 9 keys. ADS-B: This page is displayed if the ADS-B pilot set option is selected during installation configuration of an ES enabled GTX 330. ADS-B defaults to ON at each power cycle. ADS-B ON/OFF is controlled by the START/STOP key. Turn ADS-B OFF only at the request of ATC. NO ADSB: Will appear in the upper left corner when ADS-B is configured on but cannot transmit the position of the aircraft. Or when ADS-B TX is manually turned off.