Garmin GXM 53 Installation Instructions - Page 1
Garmin GXM 53 Manual
View all Garmin GXM 53 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
GXM™ 53 Installation Instructions Important Safety Information WARNING The weather information provided through this product is subject to service interruptions and may contain errors, inaccuracies, or outdated information, and consequently should not be relied upon exclusively. Always use common sense while navigating, and check alternate weather information sources prior to making safety-related decisions. You acknowledge and agree that you shall be solely responsible for use of the weather information and all decisions taken with respect to navigating in weather. Garmin® will not be responsible for any consequences of using SiriusXM® weather information. When connecting the power cable, do not remove the in-line fuse holder. To prevent the possibility of injury or product damage caused by fire or overheating, the appropriate fuse must be in place as indicated in the product specifications. In addition, connecting the power cable without the appropriate fuse in place voids the product warranty. CAUTION Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding. NOTICE When drilling or cutting, always check what is on the opposite side of the surface. Registering Your Device Help us better support you by completing our online registration today. • Go to my.garmin.com. • Keep the original sales receipt, or a photocopy, in a safe place. Contacting Garmin Product Support • Go to support.garmin.com for in-country support information. • In the USA, call 913-397-8200 or 1-800-800-1020. • In the UK, call 0808 238 0000. • In Europe, call +44 (0) 870 850 1241. Software Update You should update the software on all of your Garmin devices when you install this device. The software update requires either a Garmin memory card reader accessory or a Garmin chartplotter connected over the Garmin Marine Network (sold separately). Garmin devices support up to a 32 GB memory card, formatted to FAT32. Updating the Device Software Before you can update the software, you must obtain a software-update memory card or load the latest software onto a memory card. 1 Turn on the chartplotter. 2 After the home screen appears, insert the memory card into the card slot. NOTE: In order for the software update instructions to appear, the device must be fully booted before the card is inserted. 3 Follow the on-screen instructions. 4 Wait several minutes while the software update process completes. 5 When prompted, leave the memory card in place and restart the chartplotter manually. 6 Remove the memory card. NOTE: If the memory card is removed before the device restarts fully, the software update is not complete. Loading the New Software on a Memory Card 1 Insert a memory card into the card slot on the computer. 2 Go to www.garmin.com/support/software/marine.html. 3 Select Download next to GPSMAP Series with SD Card. 4 Read and agree to the terms. 5 Select Download. 6 Select Run. 7 Select the drive associated with the memory card, and select Next > Finish. Antenna Mounting Considerations You can mount the antenna on a flat surface or attach it to a standard 1 in. OD, 14 threads per inch, pipe-threaded pole (not included). You can route the cable outside of the pole or through the pole. For best performance, consider these guidelines when selecting the antenna mounting location. • To ensure the best reception, the antenna should be mounted in a location that has a clear, unobstructed view of the sky in all directions . À • The antenna should not be mounted where it is shaded by the superstructure of the boat , a radome antenna, or the mast. Á • The antenna should not be mounted near the engine or other sources of Electromagnetic Interference (EMI) .  • If a radar is present, the antenna should be mounted above the path of the radar . If necessary, the antenna may be à mounted below the path of the radar . Ä • The antenna should not be mounted directly in the path of the radar . Å • The antenna should be mounted at least 1 m (3 ft.) away from (preferably above) the path of a radar beam or a VHF radio antenna . Æ December 2016 Printed in Taiwan 190-02153-02_0A