Garmin Mobile 10 User Guide - Page 6
More Information on the Wireless Connection, 6 Install the GPS 10x in a Vehicle, 7 Acquire GPS Signals
UPC - 753759062439
View all Garmin Mobile 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Bluetooth LED Status • Rapid Flashing Blue: power on, Bluetooth on • Slow Flashing Blue: Bluetooth link to your mobile device established Power LED Status • Flashing Yellow Green: charging in progress • Solid Yellow Green: battery is charged • Flashing Orange: low battery • Solid Orange: faulty battery or system error More Information on the Bluetooth® Wireless Connection • Make sure the GPS 10x is turned on. • If nRoute cannot find your GPS 10x, select Utilities > Select GPS, and click AutoDetect. • Make sure the Bluetooth software on your mobile device is properly configured. nRoute connects to your GPS 10x using a COM port. • The GPS 10x receiver PIN/passkey is 1234. • See www.garmin.com/support/faqs. Enter "Bluetooth" and click Search. ➎ Install the GPS 10x in a Vehicle To communicate using Bluetooth® wireless technology, the GPS 10x receiver must be within approximately 30 feet (10 meters) of the mobile device. To receive satellite signals, place the GPS 10x receiver where it has a clear view of the sky. ➏ Acquire GPS Signals Open the navigation software (nRoute or Garmin Mobile XT) on your mobile device. Check that the Blue LED on the GPS 10x receiver is slowly flashing blue, indicating a wireless connection. Go outdoors to an open area, away from tall buildings and trees. Acquiring satellite signals may take a few minutes. When the Infobar in nRoute displays Ready to Navigate, your GPS 10x receiver has acquired satellite signals. When the bars in the upper-left corner of Garmin Mobile XT are green, your GPS 10x receiver has acquired satellite signals. Garmin Mobile™ 10 set up and go!