Garmin Mobile 20 set up and go - Page 7
GPS 20SM LED Status Indicators, GPS 20SM Beep Meanings, Adjusting the Volume - free
UPC - 753759062484
View all Garmin Mobile 20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
GPS 20SM LED Status Indicators The blue LED indicates the GPS Bluetooth connection. The green LED indicates the hands-free connection. Blue Bluetooth GPS LED Status • Blue flashing: making GPS Bluetooth connection • Blue steady on: GPS Bluetooth connection made • Blue and green steady on: GPS and hands-free connection made (not supported by all phones) Green Bluetooth Hands-free LED Status • Green steady on: hands-free connection made • Green rapid flashing: incoming call • Green flashing: call in progress GPS 20SM Beep Meanings • High short beep: hands-free connection made between GPS 20SM and phone • Low short double-beep: hands-free connection ended between GPS 20SM and phone Adjusting the Volume Press the wheel on the right side of the phone mount up to raise volume or down to lower. Press and hold up or down to quickly adjust the volume. Garmin Mobile™ 20 set up and go! Using the Hands-free Wheel Press the wheel on the right side of the phone mount in to perform hands-free operations: Quickly Press to... Not connect to the Connected previously paired phone Connected use voice dial (if supported by your phone) In a Call hang up the call Incoming answer an incoming Call call Press and Hold to... dial the last number dialed transfer the call to your phone so you can walk away from the GPS 20SM while on a call reject an incoming call (On most phones and plans, rejecting the call sends it to your voice mail.) Note: You may have to adjust the earpiece volume on your phone to maximize the audio output of the GPS 20SM. See your phone's documentation.