Garmin RINO 130 Quick Start Guide - Page 1

Using the Weather Radio The Weather Radio provides a constant update of weather conditions, which is helpful while outdoors or planning a trip. Seven Weather Radio channels are available. For more information about the Weather Radio, refer to the Owner's Manual. To turn the Weather Radio on: 1. Open the Radio Page by pressing the Page button. 2. Highlight the Option Menu button and press the Thumb Stick In. 3. Highlight Use Weather Radio and press the Thumb Stick In. Radio Page with Weather Radio On Marking a Waypoint Marking a waypoint is simply capturing your current location and storing it in the unit's memory. The unit must be turned on and tracking satellites to mark a waypoint. To mark a waypoint: 1. Press the Thumb Stick In and hold it until the Shortcuts Menu is displayed. 2. Highlight Mark Waypoint and press the Thumb Stick In to display the Mark Waypoint Page shown below. Symbol Field Name Field Mark Waypoint Page 3. Highlight the Name field and press the Thumb Stick In. Enter a new name. When finished, highlight OK then press the Thumb Stick In. 4. Highlight the Symbol field and press the Thumb Stick In. Choose a symbol then press the Thumb Stick In to accept the selection. 5. Highlight the OK button at the bottom of the page and press the Thumb Stick In to save the waypoint. Navigating with Your Rino 130 You can navigate to a waypoint, city, exit, or a contact's location. Using optional detailed maps, you can also navigate to points of interest, addresses, and intersections. To begin navigation using Find 'N Go: 1. Press the Thumb Stick In to display the Shortcuts Menu. 2. Highlight Find 'N Go and press the Thumb Stick In. 3. Highlight Waypoints and press the Thumb Stick In. Select the desired option (by Nearest or by Name), and press the Thumb Stick In. 4. Highlight the desired waypoint and press the Thumb Stick In. 5. With the Waypoint Page displayed, highlight the Goto button at the bottom of the page and press the Thumb Stick In to begin navigation. The Navigation Page automatically opens to guide you to your destination. See below for more information. Navigation Page The two main components of the Navigation Page are the compass ring and the pointer. As you move, the compass ring rotates showing your current direction of travel at the top of the display. The pointer points toward your destination. When the pointer is aligned with the vertical line at the top of the compass ring, you are on a direct course toward your destination. The unit has to be moving to navigate. If you are standing still or moving very slowly, Navigation Page the navigation data may not be accurate. Using Contacts The first time you receive a signal from another Rino user, the New Contact page is displayed. From the New Contact page you can show the user's location on your Map, Goto that position, select OK to add them to your contact list, or press the Page/Quit button to disregard the contact. Every time you receive signals from contacts, your map is updated showing their new position. A Track Log of their movement is created and New Contact Page shown on your map. Sending a Location You can send any location that you have available in your Find 'N Go menu. These may be waypoints, contacts, cities, exits, or any other data that is loaded in the unit. Below are the steps to send a waypoint. To send a location (waypoint) using Find 'N Go: 1. Press the Thumb Stick In and hold it until the Shortcuts Menu is displayed, or press the Page button until the Main Menu is displayed. 2. Highlight Find 'N Go and press the Thumb Stick In. Highlight Waypoints and press the Thumb Stick In. Select Nearest or By Name and press the Thumb Stick In. 3. Highlight the waypoint that you want to send and press the Thumb Stick In to display the Waypoint Review page. 4. Highlight the Option Menu button Stick In. and press the Thumb 5. Select Send Location and press the Thumb Stick In. Send Location The location is sent to all Rinos on the same channel and squelch code as you. They can then choose to Goto that location, view the location on the map (Map), or save the location (OK). Using Peer-to-Peer Positioning The Rino's most unique feature is Peer-to-Peer positioning, sending the location of one Rino unit to other Rino units. Peer-to-Peer positioning allows you to track the movement of other Rino users and even navigate to their location. To send your location: Press and release either the Call or Talk button. Your Rino 130 automatically sends out its location. Other Rino users monitoring the same channel and squelch code receive this information. Polling a Location If you have not heard from a contact in a while and would like to know that contact's current location, you may "poll" the contact's location. This will update that contact's location in your Rino 130. To poll a location: 1. Press the Thumb Stick In and hold it until the Shortcuts Menu is displayed, or press the Page button until the Main Menu is displayed. 2. Highlight Find 'N Go and press the Thumb Stick In. Highlight Contacts and press the Thumb Stick In. 3. Highlight the contact that you want to poll and press the Thumb Stick In to display the Contact Review page. 4. Highlight the Option Menu button and press the Thumb Stick In. 5. Select Poll Location and press Polling a contact's location the Thumb Stick In. Sending a Note You can send a note to communicate silently with other Rino 130 users on the same channel and squelch code that you are using. This can be a Saved Note or a new note. (This feature is not available on Rino 110 units.) To send a note: 1. Press the Thumb Stick In to display the Shortcuts Menu. 2. Select the Send Note option. 3. To create a new note or edit an existing note, press the Thumb Stick In when the Edit Note field is highlighted. Enter your note using the data entry keyboard. Select OK when complete. To use a Saved Note, select the desired note from the Saved Note list and press the Thumb Stick In. 4. Select Send to send the note to all Rino 130 users on the same channel and squelch code that you are using. Select Save to save the note for future use. Select Clear to erase the note. If you have further questions or just want to learn more about the operation of Rino 130, refer to the Owner's Manual, which provides detailed information about all of your Rino 130's features. Rino® 130 Quick Start Guide Power button: • Press and hold to turn the unit On/Off • Press to adjust contrast and backlighting Call button: • Press to send out Call Tone • Sends position when released (if enabled) Talk button: • Press and hold to talk • Sends position when released (if enabled) Page/Quit button: • Press to cycle through main pages • Used to quit or escape menu items Volume (V) button: • Press to open volume control window Speaker Thumb Stick • Press In to enter highlighted options and to confirm messages • Move Up, Down, Right or Left to move through lists, highlight fields, on-screen buttons, icons, enter data, or move the map panning arrow • Press In and hold to display Shortcuts Menu. Zoom/Map (Z) button: • From the Map Page, press to open Zoom control window • From any other page, press to display Map Page Microphone: • Hold unit 3-4 inches away when talking Step-by-Step Instructions to Get You Started (Turn this page and begin with Step 1) Part Number 190-00284-01 Rev. B