Garmin echo 101 Owner's Manual - Page 7

Battery: Sounds when the battery reaches a specified low voltage. Deep Water: Sounds when the water depth is deeper than the specified depth. Drift: Sounds when depth variations at your present location exceed the specified depth. Fish: Sounds when the device detects a suspended target. • sets the alarm to sound when fish of all sizes are detected. • sets the alarm to sound only when medium or large fish are detected. • sets the alarm to sound only when large fish are detected. Shallow Water: Sounds when the water depth is shallower than the specified depth. Water Temperature: Sounds when the water temperature varies more than ± 2 °F (± 1. 1 °C). Alarm settings are saved when the device is turned off. NOTE: You must connect the device to a temperaturecapable transducer to use this alarm. System Settings Select MENU > Setup > System. Language: Sets the on-screen language. System Information: Allows you to view software information. System Unit Settings Select MENU > Setup > Units. Depth: Sets the depth units to feet (ft), meters (m), or fathoms (ftm). Temperature: Sets the temperature units to Fahrenheit (°F) or Celsius (°C). NOTE: You must have a temperature-reading transducer connected to display the temperature. Appendix Specifications Specification Temperature Range Compass Safe Distance Power Source Voltage Range Rated Current Fuse Freshwater Depth* Model Measurement echo 101 and 151 From 5° to 131°F (from -15° to 55°C) echo 201, 301, and From 5° to 131°F (from 500 series -15° to 55°C) echo 101 and 151 10 in. (250 mm) echo 201 and 301 10 in. (250 mm) echo 500 series 15. 75 in. (400 mm) echo 101 From 10 to 20 V echo 201, 301, and From 10 to 28 V 500 series All models 1 A All models AGC/3AG - 3. 0 A echo 151 1600 ft (488 m) @ 77 kHz echo 201, 201dv, 1750 ft. (533 m) @ 77 kHz 301, and 301dv echo 500 and 500dv series 2300 ft. (701 m) @ 77 kHz *Depth capacity is dependent on water salinity, bottom type, and other water conditions. Cleaning the Outer Casing NOTICE Avoid chemical cleaners and solvents that can damage plastic components. 1 Clean the outer casing of the device (not the screen) using a cloth dampened with a mild detergent solution. 2 Wipe the device dry. Cleaning the Screen NOTICE Cleaners containing ammonia will harm the anti-reflective coating. The device is coated with a special anti-reflective coating which is very sensitive to skin oils, waxes, and abrasive cleaners. 1 Apply an eyeglass lens cleaner specified as safe for anti- reflective coatings to the cloth. 2 Gently wipe the screen with a soft, clean, lint-free cloth. Software License Agreement BY USING THE DEVICE, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY. Garmin Ltd. and its subsidiaries ("Garmin") grant you a limited license to use the software embedded in this device (the "Software") in binary executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the Software remain in Garmin and/or its thirdparty providers. You acknowledge that the Software is the property of Garmin and/or its third-party providers and is protected under the United States of America copyright laws and international copyright treaties. You further acknowledge that the structure, organization, and code of the Software, for which source code is not provided, are valuable trade secrets of Garmin and/or its third-party providers and that the Software in source code form remains a valuable trade secret of Garmin and/or its third-party providers. You agree not to decompile, disassemble, modify, reverse assemble, reverse engineer, or reduce to human readable form the Software or any part thereof or create any derivative works based on the Software. You agree not to export or re-export the Software to any country in violation of the export control laws of the United States of America or the export control laws of any other applicable country. Appendix 3