Garmin nuvi 270 Set up and Go! - Page 3
Step 1: Mount the nüvi, Ways to Charge the nüvi - accessories
UPC - 753759068080
View all Garmin nuvi 270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Check your state and local traffic laws before mounting. Currently, state laws in California and Minnesota prohibit drivers from using suction mounts on their windshields while operating motor vehicles. Other Garmin dashboard or friction mounting options should be used. See page 12 for more details. Step 1: Mount the nüvi Select a suitable location to mount the nüvi on your windshield. Clean and dry the suction cup and the selected area of your windshield. 1. Plug the power cable into the back of the nüvi. Suction cup mount 2. Fit the ball on the end of the mount into the Cradle round socket on the cradle and press firmly until it snaps together. 3. Place the suction cup on the windshield, and flip the lever back toward the windshield. 4. Press the bottom of the nüvi into the cradle, and snap the top of the nüvi into place. 5. Plug the power cable into a power outlet in your vehicle. Your unit should turn on automatically if it is plugged in and your vehicle key is turned to ON/ACC. Ways to Charge the nüvi • Connect the vehicle power cable to the nüvi and to a power outlet in your vehicle. • Connect an AC adapter (optional accessory) to the nüvi and a wall outlet. nüvi 200 Series set up and go! guide Vehicle power cable