Garmin nuvi 3590LMT Owner's Manual - Page 77
Mounting on Your Dashboard, Removing the Device, Cradle, and Mount
View all Garmin nuvi 3590LMT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
4 Place the silver tip in the end piece. 5 Screw the end piece back into the vehicle power cable ➍. Mounting on Your Dashboard Notice The permanent mounting adhesive is extremely difficult to remove after it is installed. Use the mounting disk to mount your device to the dashboard and comply with certain state regulations. See www.garmin.com for more information. 1 Clean and dry the dashboard where you are placing the disk. 2 Remove the backing from the adhesive on the bottom of the disk. 3 Place the disk on the dashboard. 4 Remove the clear plastic cover from the top of the disk. nüvi 3500 Series Owner's Manual 5 Place the suction cup mount on top of the disk. 6 Flip the lever down (toward the disk). Removing the Device, Cradle, and Mount Removing the Device from the Cradle 1 Press the tab on the bottom of the cradle. 2 Tilt the device forward. Removing the Cradle from the Mount 1 Turn the cradle to the right or left. 2 Apply pressure until the socket on the cradle releases the ball on the mount. Removing the Suction Cup Mount from the Windshield 1 Flip the lever on the suction cup mount toward you. 2 Pull the tab on the suction cup toward you. 71