Garmin nuvi 5000 Owner's Manual - Page 8
Step 1: Mount the nüvi, Use the enclosed mounting disk to, mount your unit to the dashboard - cradle
UPC - 753759071431
View all Garmin nuvi 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Getting Started Step 1: Mount the nüvi To mount the nüvi using the suction cup mount: 1. Plug the vehicle power cable into the power connector on the right side of the cradle. Cradle Power cable 5. Fit the bottom of your nüvi into the cradle. 6. Tilt the nüvi back until it snaps into place. 2. Clean and dry your windshield with a lint-free cloth. Remove the clear plastic from the suction cup. Place the suction cup on the windshield. 3. Flip the lever back, toward the windshield. 4. Snap the cradle onto the suction cup arm. Suction cup mount 7. Plug the other end of the vehicle power cable into a power outlet in your vehicle. Your unit should turn on automatically if it is plugged in and the vehicle key is turned to the ON/ACC position. 8. If you are using a traffic receiver in Europe, secure the traffic receiver's antenna to the windshield using the suction cups. To mount the nüvi using the dashboard mount: Use the enclosed mounting disk to mount your unit to the dashboard and comply with certain state regulations. nüvi 5000 Owner's Manual