Gateway 610 Gateway 610 Media Center User's Guide - Page 10
Setting up the hardware
View all Gateway 610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Setting up the hardware 2 4 1 Connect the modem (optional) 3 Connect the audio/video source A coaxial (TV in) connection carries both the audio and video signals. If you use an S-Video connection, then also connect audio using RCA stereo plugs. For detailed instructions about connecting the audio/video 10 source (step 3), see page 12. 3 3 1 2 Connect your broadband Internet (optional) 4 Connect the IR control cable (optional) Plug one end of the IR control cable into your computer, then adhere the other end to the set-top box sensor window. Remove the adhesive paper from the back of the IR control. For detailed instructions about connecting the IR control cable (step 4), see page 13.
10
Setting up the hardware
Connect your broadband
Internet
(optional)
Connect the modem
(optional)
Connect the audio/video source
A
coaxial
(TV in) connection carries both the audio
and video signals.
If you use an
S-Video
connection,
then also connect audio using
RCA stereo plugs.
Connect the IR control cable
(optional)
Plug one end of the IR control cable into your
computer, then adhere the other end to the set-top box
sensor window.
For detailed instructions about connecting the IR control
cable (step 4), see page 13.
1
2
3
4
3
Remove the adhesive
paper from the back of
the IR control.
1
3
2
4
For detailed instructions about connecting the audio/video
source (step 3), see page 12.