Gateway E-9422R Gateway E-9422R Server User Guide - Page 60
flash or turn off. The BIOS Setup utility opens., Restart your server
View all Gateway E-9422R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
CHAPTER 4: Installing Components 12 Tighten the two system board thumbscrews you loosened in Step 8. 13 Connect the cables you removed in Step 7 14 Replace the memory by following the instructions in "Installing memory" on page 36. 15 Replace the processor and heatsink by following the instructions in "Replacing or adding a processor" on page 44. 16 Reinstall the PCI riser assembly by following the instructions in "Installing and removing PCI expansion cards" on page 39. 17 Replace the system fans and fan cage by following the instructions in "Replacing system fans" on page 42. 18 Follow the instructions in "Closing the server case" on page 30. 19 Restart your server, then press F2 at any time after you see the LEDs on your keyboard flash or turn off. The BIOS Setup utility opens. 20 Check BIOS settings to make sure that they detect the server's new hardware, then save your changes (if any) and close the BIOS Setup utility. 21 If your server does not start after installing the new system board, contact Gateway Customer Care. For more information, see "Getting Help" on page 8. 54