Gateway GT5032 8510943 - Gateway Computer User Guide (6-Bay Micro uBTX Case) - Page 97
Router Name, Domain Name, LAN IP Address, Obtain an IP Address Automatically, Specify an IP Address - blank screen
View all Gateway GT5032 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Creating an Ethernet network ■ Router Name and Domain Name - Check with your ISP to see if entries are required in these fields and, if so, what entries are required. Normally, leaving the fields blank will work. ■ LAN IP Address - We recommend that you accept the defaults. ■ WAN IP Address - If your ISP assigns you a different IP address each time you log on, click Obtain an IP Address Automatically. If your ISP requires a fixed IP address, click Specify an IP Address, then type the values provided by your ISP. 4 When you are finished entering information on the Setup page, click Apply. 5 Click the DHCP tab on the top of the screen. 6 Click the Enable checkbox, then click Apply. 7 Press the reset button on your cable or DSL modem, then restart the computer. Your network should be running. Go to "Testing your network" on page 92. www.gateway.com 91