Gateway MT6841 8511725 - Gateway Service Guide - Page 35
Replacing the keyboard
View all Gateway MT6841 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
www.gateway.com Replacing the keyboard Tools you need to complete this task: Flat-blade driver - OR - Phillips #0 screwdriver Screws removed during this task: Scribe or non-marring tool 2 black (keyboard cover) 1-3 black (keyboard) To replace the keyboard: 1 Complete the steps in "Preparing the notebook" on page 6. 2 Remove the keyboard cover by following the instructions in "Replacing the keyboard cover" on page 29. 3 Remove the keyboard screw. Tip The screw hole is marked with a K. Keyboard screw 4 Gently lift the back edge of the keyboard. • If the keyboard does not lift, go to Step 5. • If the keyboard lifts, go to Step 10. 31
www.gateway.com
31
Replacing the keyboard
Tools you need to complete this task:
Screws removed during this task:
To replace the keyboard:
1
Complete the steps in
“Preparing the notebook” on page 6
.
2
Remove the keyboard cover by following the instructions in
“Replacing the keyboard cover”
on page 29
.
3
Remove the keyboard screw.
4
Gently lift the back edge of the keyboard.
•
If the keyboard does not lift, go to
Step 5
.
•
If the keyboard lifts, go to
Step 10
.
Tip
The screw hole is marked with a K.
Flat-blade driver
Scribe or non-marring tool
- OR -
Phillips #0 screwdriver
1-3 black (keyboard)
2 black (keyboard cover)
Keyboard
screw