Gateway MX6708 8511371 - Component Replacement Manual - Page 8
Important
View all Gateway MX6708 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
9 If you are removing a memory module, gently press outward on the clip at each end of the module until the module tilts upward. 10 Pull the memory module out of the slot. Replacing the Memory Module 11 Hold the new or replacement module at a 30-degree angle and slide it into the empty memory slot. This module is keyed so it can only be inserted in one direction. If the module does not fit, make sure that the notch in the module lines up with the tab in the memory bay. Important Use only memory modules designed for your Gateway notebook. 12 Gently push the module down until it clicks in place. 13 Replace the memory bay cover, then tighten the cover screws. 14 Replace the keyboard screw. 15 Insert the batteries, then turn your notebook over. 16 Reconnect the optional port replicator. -ORConnect the power adapter, the modem cable, and the network cable. 17 Turn on your notebook. Technical Support See the label on the bottom of the notebook for Customer Care Information. See your hardware guide for important safety, regulatory, and legal information. 2 www.gateway.com © 2006 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks or registered trademarks of Gateway, Inc. in the United States and other countries. All other brands and product names are trademarks or registered trademarks of their respective companies.