GE 24904 Instruction Manual - Page 8
Programming With Code Search
 |
UPC - 030878249041
View all GE 24904 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Programming With Code Search If your TV, VCR, or Cable Box does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following the steps below. 1. Turn on the device you wish to program. 2. Press and hold SETUP until the INDICATOR LIGHT lights, then release SETUP. 3. Press and release the device button for the device you are programming (TV, VCR, CAB/DVD). The INDICATOR LIGHT will blink once. For AUX, press AUX then the device button you are assigning to AUX. 4. Press and release POWER until your device turns off. Important: You may have to press POWER up to 200 times. 5. When your device turns off, press the ENTER button, the INDICATOR LIGHT will go off. BLINK 8
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
8
Programming With Code Search
If your TV,VCR, or Cable Box does not respond
after you have tried all the codes for your
brand, or if your brand is not listed, try search-
ing for your code by following the steps
below.
1.
Turn on the device
you wish to program.
2.
Press and hold
SETUP until the
INDICATOR LIGHT
lights, then release
SETUP.
3.
Press and release the
device button for the
device you are
programming (TV,
VCR, CAB/DVD).
The INDICATOR
LIGHT will blink once.
For AUX, press AUX
then the device button
you are assigning to AUX.
4.
Press and release POWER
until your device turns
off. Important: You
may have to press
POWER up to 200 times.
5.
When your device turns
off, press the ENTER
button, the INDICATOR
LIGHT will go off.
BLINK