GE 45136 User Manual - Page 6
press and hold, the Mute button on the side of the Control, Center for three seconds., Test - alarm siren
UPC - 043180451361
View all GE 45136 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Step 2 - Press and hold the Learn button inside the Alarm Siren. The 'ON' indicator on the front will begin to flash and it will sound continuious beeps. Step 3 - While continuing to press the Learn button on the Alarm Siren, press and hold the Mute button on the side of the Control Center for three seconds. The Control Center will send a test signal to the Alarm Siren. When the Alarm Siren receives the test signal it will sound a long tone and the 'ON' indicator will stop flashing. Input DC 12V -+ Mute Learn Alert Chime Off Step 4 - Release all buttons This indicates the Alarm Siren has been linked with the Control Center. Replace cover to Alarm Siren. Test the Alarm Siren Step 1 - After the Alarm Siren has been successfully linked with the Control Center press and hold the Mute button on the Control Center for three seconds. Step 2 - When the Alarm Siren receives the test signal from the Control Center, one LED indicator on the Alarm Siren will begin to flash. It will continue to flash for 30 seconds. This indicates it has received the test signal. Installation Turn the Alarm Siren over and adjust the triangle hang tags as shown in digram (1). After you have turned the triangle hang tags into the correct position, now you are ready to install. Find the place that you would like to hang the Alarm Siren. Use the screws included for