GE CFCP1NIZSS Use and Care Manual - Page 27
Installation Instructions, REVERSING THE DOOR SWING
UPC - 084691211921
View all GE CFCP1NIZSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installation Instructions REVERSING THE DOOR SWING (Single Door Refrigerator Models only) IMPORTANT NOTES When reversing the door swing: NOTE: Door swing is not reversible on stainless steel models. • Read the instructions all the way through before starting. • Parts are included in the door hinge kit. • Handle parts carefully to avoid scratching paint. • Set screws down by their related parts to avoid using them in the wrong places. • Provide a non-scratching work surface for the doors. IMPORTANT: Once you begin, do not move the cabinet until door-swing reversal is completed. These instructions are for changing the hinges from the right side to the left side-if you ever want to change the hinges back to the right side, follow these same instructions and reverse all references to left and right. • Once door swing is finalized, ensure the logo badge is properly aligned and permanently secured to the door by removing the adhesive cover on the back side. NOTE: A replacement logo badge is included in the hinge kit. Unplug the refrigerator from its electrical outlet. Empty all door shelves, including the dairy compartment. 1 REMOVE THE REFRIGERATOR DOOR A Tape the door shut with masking tape. B Remove the hinge cover on top of the refrigerator door by removing the Phillips-head screws and pulling it up. C Using a 5/16″ socket ratchet/driver, remove the bolts securing the top hinge to the cabinet. Then lift the hinge straight up to free the hinge pin from the socket in the top of the door. Hinge Cover TOOLS YOU WILL NEED Adjustable Wrench 5/16″ Socket Ratchet/Driver Masking Tape Thin-blade Screwdriver Top Hinge D Remove the tape and tilt the door away from the cabinet. Lift the door off the center hinge pin. Ensure that the plastic hinge pin thimble remains on the hinge pin or inside door hinge pin hole located in the bottom of the door. Phillips Screwdriver Torx T-20 Driver E Set the door on a non-scratching surface with the inside up. 27