GE CFE28UELDS Installation Instructions - Page 28

Reinstalling The, Refrigerator Doors, Remove The Refrigerator, Doors Cont, Installing

Get GE CFE28UELDS PDF manuals and user guides View all GE CFE28UELDS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

INSTALLATION INSTRUCTIONS Installation Instructions INSTALLING THE REFRIGERATOR (Cont.) 3 REMOVE THE REFRIGERATOR DOORS (cont) Note: for proper installation later, please follow the next step carefully. F )UHVK)RRGGRRUVWREHREMOVED and INSTALLEDRSHQHGDW° with case front. /LIWXS RII center hinge 2SHQ'RRUWR ƒ REMOVE OPPOSITE DOOR )ROORZWKHVDPHSURFHGXUHRQWKHRSSRVLWH door. There are no wires or water lines on the opposite side 4 REMOVE CENTER HINGE (if necessary) 5HPRYHWKHƎVFUHZVVHFXULQJWKHFHQWHUKLQJHWR WKHFDELQHW8VH7GULYHUWRUHPRYHRXWERDUGVFUHZ Remove center screw /RRVHQ2XWHUVFUHZV 28 5 REINSTALLING THE REFRIGERATOR DOORS Reverse steps 1 through 4 to reinstall refrigerator, follow details below for critical alignments. A Reinstall center hinge first and torque the screws to 65 in-lbs. With WKH/+GRRUDWº to the front of the case, lower the refrigerator door onto the center hinge. Ensure that the door and hinge align correctly. B Rotate doors closed and make sure moveable center sealing portion of the door aligns with WKHVWULNHU,IWKHGRRUZLOOQRWVHOIFORVHDIWHU reinstalling, remove door, turn door upside down, FKHFNDOLJQPHQWPDUNDQGDUURZ WKHUHLVDQ DOLJQPHQWPDUNRQWKHGRRUFORVXUHPHFKDQLVP,W corresponds to an alignment mark on the bottom end cap. Rotate door closure mechanism to align PDUNDQGDUURZUHLQVWDOOGRRU  8QGHUVLGHRI)UHVK)RRG'RRU align marks If door cannot be installed at 90° follow steps below: ,IVSDFHRUPRGHOOLPLWVRSHQLQJGRRUWROHVVWKDQƒWKHQ D 5HPRYHGRRUFDUHIXOO\WXUQGRRUXSVLGHGRZQ E &KHFNDOLJQPHQWRIGRRUFORVXUHPHFKDQLVPVKDIWRQ underside of door. The flats on the shaft should correspond to alignment tab on plastic ring or mark on bottom end cap. F ,IVKDIWLVQRWDOLJQHGWRWDEPDUNXVLQJ´$OOHQ wrench, rotate door closure mechanism shaft counterclockwise for right door and clockwise for left GRRU7KHQDOLJQIODWZLWKWDEPDUN G ,QVWDOOWKHGRRUDWƒ Securely tape the door shut with masking tape or have a second person support the door. Reinstall the top hinge and torque the screws to 65 in-lbs. C Be sure to reinstall the ground wire and strain relief to the top hinge. ' Reinstall the hinge cover. Note: Ensure wires are not pinched or under screw bosses before tightening screws. 49-60741-4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
28
49-60741-4
REINSTALLING THE
REFRIGERATOR DOORS
Reverse steps 1 through 4 to reinstall refrigerator,
follow details below for critical alignments.
Reinstall center hinge
first and torque the
screws to 65 in-lbs.
With
º to the
front of the case, lower the
refrigerator door onto the
center hinge. Ensure that
the door and hinge align correctly.
Rotate doors closed and make sure moveable
center sealing portion of the door aligns with
reinstalling, remove door, turn door upside down,
corresponds to an alignment mark on the bottom
end cap. Rotate door closure mechanism to align
Securely tape the door shut with masking tape
or have a second person support the door.
Reinstall the top hinge and torque the screws to
65 in-lbs.
Be sure to reinstall the ground wire and strain relief
to the top hinge.
Reinstall the hinge cover.
Note:
Ensure wires
are not pinched or under screw bosses before
tightening screws.
REMOVE THE REFRIGERATOR
DOORS (cont)
Note: for proper installation later, please follow
the next step carefully.
REMOVED
and
INSTALLED
° with case front.
REMOVE OPPOSITE DOOR
door. There are no wires or water lines on the
opposite side
REMOVE CENTER HINGE
(if
necessary)
F
center hinge
4
A
5
B
Remove
center screw
C
align marks
If door cannot be installed at 90° follow steps below:
underside of door. The flats on the shaft should
correspond to alignment tab on plastic ring or mark
on bottom end cap.
wrench, rotate door closure mechanism shaft
counterclockwise for right door and clockwise for left
3
Installation Instructions
INSTALLATION INSTRUCTIONS
INSTALLING THE REFRIGERATOR (Cont.)