GE CNS23SSHSS Installation Instructions - Page 15

CAUTION, Replacing the light bulbs.

Page 15 highlights

Replacing the light bulbs. GEAppliances.com Turning the control to the 0 (off) position does not remove power to the light circuit. Refrigerator Lights CAUTION: Light bulbs may be hot. Unplug the refrigerator. To remove the light shield, grasp the shield at the back and pull out to release the tabs at the back. After replacing with an appliance bulb of the same or lower wattage, replace the shield. Plug the refrigerator back in. NOTE: Appliance bulbs may be ordered from GE Parts and Accessories, 800.626.2002. Rotate the shield down and then forward to release the tabs at the front of the shield. Appearance may vary Freezer Light CAUTION: Light bulbs may be hot. Unplug the refrigerator. Remove the freezer basket for access. The bulb is located at the rear of the freezer inside a light shield. To remove, grasp the shield at the top and pull out to release the tabs at the bottom. After replacing with an appliance bulb of the same or lower wattage, replace the shield and freezer basket. Plug the refrigerator back in. Lights are behind crisper drawers Middle Lights CAUTION: Light bulbs may be hot. Unplug the refrigerator. The bulbs are located behind the crisper drawers. To remove the drawers, lift up slightly while pulling the drawer past the stop location. Replace the bulbs with appliance bulbs of the same or lower wattage. Replace crisper drawers by sliding them gently back onto the tracks while lifting up slightly. Plug the refrigerator back in. Light Bulbs 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136

Refrigerator Lights
CAUTION:
Light bulbs may
be hot.
Unplug the refrigerator.
To remove the light shield, grasp the shield
at the back and pull out to release the tabs
at the back.
Rotate the shield down and then forward to
release the tabs at the front of the shield.
After replacing with an appliance bulb of
the same or lower wattage, replace the
shield.
Plug the refrigerator back in.
NOTE:
Appliance bulbs may be ordered from
GE Parts and Accessories, 800.626.2002.
Freezer Light
Replacing the light bulbs.
GEAppliances.com
Turning the control to the
0 (off)
position does not remove power to the light circuit.
CAUTION:
Light bulbs may
be hot.
Unplug the refrigerator.
Remove the freezer basket for access. The
bulb is located at the rear of the freezer
inside a light shield.
To remove, grasp the shield at the top and
pull out to release the tabs at the bottom.
After replacing with an appliance bulb of
the same or lower wattage, replace the
shield and freezer basket.
Plug the refrigerator back in.
Middle Lights
CAUTION:
Light bulbs may
be hot.
Unplug the refrigerator.
The bulbs are located behind the crisper
drawers. To remove the drawers, lift up
slightly while pulling the drawer past the
stop
location.
Replace the bulbs with appliance bulbs
of the same or lower wattage.
Replace crisper drawers by sliding them
gently back onto the tracks while lifting up
slightly.
Plug the refrigerator back in.
Lights are
behind crisper
drawers
Light Bulbs
Appearance may vary
15