GE CT9070SHSS Quick Specs - Page 1

GE CT9070SHSS Manual

Page 1 highlights

9-1/2" MAX. Junction box location Cutout depth CT9070SH 23-1/22" 2M"INto GECoCndaufite™ 40" Series 30 in.JloBucnaucttiiiolotnn-bjIbunoontxctFotirmoenonbfcoxh-DoC28uo-t1or/u2t"SwMiiIndNt.hgle Convection Wall Oven Dimensions and Installation Information (in inches) 28-5/8" MAX. F Most 30" Wall Cabinets can be used w2bit2oh"tttthooismunoift. Co4nNs0dto"autcietk:aTbDhleesiensotvaellnastiaonres.nCoatbainpeptrsoivnesdtajuflolenrdction box adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating. Door handle protrudes 2-1/2" from door face. Cutout width 28-1/2" MIN. 28-5B/8" MAX. A Cutout height 27-1/4" MIN. C 27-5/16" MAX. FE CDabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle. B Electric wall ovens are not approved for A Cutout height E C 2277--15//41"6"MMINA.XR.cuetcooumt mloecnatdioend Conduit 40" installation with a plug and receptacle. They must be hard wired in accordance with installation instructions. Installation Information: Before installing, consult installation instructions packed with product for ­current dimensional data. from oor D 16-1/4" MIN. 32-1/2" MAX. Recommended cutout location 301'6f'r-o1m/4" oor MIN. 32-1/2" MAX. 9-1/2" 9-1/2" MAX. Cutout depth 23-1/2" MIN Conduit 40" Junction location box 22" to bottom of D junction box Cutout width 28-1/2" MIN. 28-5/8" MAX A B C 2 x 4KoWr Rating equiva24le0nVt ru4n.5ners level and w2u0sit8hhVwbiot3th.t4osimdeosfocfuctuotuotut 2 x 4 oor r soBlirdeabkoetrtoSimze oor. equivalent ru2n4n0Vers 20 Amps level with bottom of cutout and ush wit2h0s8iVdes2o0f Acumtposut or solid bottom oor. lbs.) 30'' CT9070 30'' Cabinet A - Overlap of oven at top of cutout B - Overlap of oven over side of edges oCfTc9u0t7o0ut Cabinet C - Overlap of oven at bottom of cutout 30" A - OverlOapveonf oven at top of cutout 1-1/4" B - OverlapDo-f oOvveenraolvledrespidtehowf ietdhgheasnodf lceutout C - Overlap ofOovveenraalltdbeoptttohmwoitfhcouutotuhtandle Oven E - Overall height with trim D - OverallFde-pOthvewriathll hwainddthle Overall depth without handle 3/4" 1-1/4" 27-3/16" 23-1/2" 30" CL 2 x 4 or 1-1/4" 3/4" CL equivalent runners 2 x 4 or equivalent runners level with bottom of cutout level with bottom of cutout and ush wiCtahbisniedtes of cutout 1-1/4" and ush with sides of or solid bottom oor. cutout or solid bottoAm- Ovoeorlra.p of oven at top of cutout B - Overlap of oven over side of edges 27-3/16" Suitable Suitable 23-1br/a2ci"ng to support 2r8u-n3n/e8rs" (must bracing supptoorst u20p0plbosr.t) runners (must support 200 lbs.) C - Overlap of oven at bottom of cutou Oven D - Overall depth with handle Overall depth without handle E - Overall height with trim 29-3/4" F - Overall width E - Overall height with trim F - Overall width 28-3/8" 29-3/4" Listed by Underwriters Laboratories For answers to your Monogram® or GE appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. Specification Revised 1/15

  • 1
  • 2
  • 3

Listed by
Underwriters
Laboratories
For answers to your Monogram
®
or GE appliance
questions, visit our website at geappliances.com
or call GE Answer Center
®
service, 800.626.2000.
F
E
Conduit
40"
D
Cutout depth
23-1/2" MIN
B
C
2
2
22" to
bottom of
junction box
Junction box
location
Dimensions and Installation Information (in inches)
Most 30” Wall Cabinets can be used with this unit.
Note:
These ovens are not approved for
stackable installations.
Cabinets installed
adjacent to wall ovens must have an adhesion
spec of at least a 194°F temperature rating.
Door handle protrudes 2-1/2" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference
with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance
with installation instructions
.
Installation Information:
Before installing,
consult installation instructions packed with
product for current dimensional data.
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Recommended
cutout location
from floor
Cutout height
27-1/4" MIN.
27-5/16" MAX.
16-1/4" MIN.
32-1/2" MAX.
of
n box
KW Rating
240V
4.5
208V
3.4
Breaker Size
240V
20 Amps
208V
20 Amps
C
L
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Cabinet
30"
A – Overlap of oven at top of cutout
1-1/4"
B – Overlap of oven over side of edges of cutout
3/4"
C – Overlap of oven at bottom of cutout
1-1/4"
Oven
D – Overall depth with handle
27-3/16"
Overall depth without handle
23-1/2"
E – Overall height with trim
28-3/8"
F
– Overall width
29-3/4"
CT9070
Specification Revised
1/15
CT9070SH
GE Cafe
Series 30 in. Built-In French-Door Single Convection Wall Oven