GE DPVH880GJWW Owners Manual - Page 38

Installation Instructions REVERSING THE DOOR SWING (if desired) 3 REVERSE DOOR HANDLE AND CAPS (CONT.) E Reassemble the inner handle to the outer handle, using 3 screws (#8 x 0.625″ tapping screws). Inner handle 3xD Screws (inner handle) F Assemble the new right-side door cap (from reversibility kit), using 2 screws (#8 x 0.625″ tapping screws). 4 REVERSE HINGE AND CAPS • Lay the inner door down on a soft, protected flat surface so that the inner part faces up. • Remove the 2 black plug buttons on the opposite side of the hinge, using a putty knife or thin-blade screwdriver. • Disassemble the inner door cap from the inner door by removing 2 screws (#8 x 0.75″ tapping screws). • Disassemble the hinge from the inner door by removing 4 screws (#8-32 x 0.50″ machine screws). Hinge 2 black Remove plug buttons 4 x E screws Inner door cap 2xD Screws 2 x D Screws Door cap Put the chrome cover aside on a soft, protected flat surface. • Assemble the hinge to the opposite side of the inner door, using 4 screws (#8-32 x 0.50″ machine screws). • Assemble the new inner door cap (from reversibility kit) on the opposite side of the hinge, using 2 screws (#8 x 0.75″ tapping screws). • Install the 2 black plug buttons on the opposite side of the hinge in the 2 remaining holes. Replace 2xD screws Inner door cap Replace Replace 4xE 2 black screws plug buttons Hinge 38