GE FUF17DLRWW Use and Care Manual - Page 6

USING THE FREEZER: Temperature Control Temperature Control 'HFUHDVH3DG 7XUER)UHH]H/LJKW Lock Controls Light High Temp Light 'RRU2SHQ/LJKW °F °C Demo ON Turbo Freeze ON Control Lock Hold 3 Sec Alarm Reset High Temp Door open Increase Pad Alarm Reset Pad This electronic temperature control is located on the front of the freezer door. The temperature is factorypreset to provide satisfactory food storage temperatures. To adjust the temperature setting, press - to decrease WHPSHUDWXUHVDQGWRLQFUHDVHWHPSHUDWXUHV$OORZ several hours for the temperature to stabilize between adjustments. High Temp Alarm This electronic control has a high temperature alarm feature. An alarm will sound if the freezer temperature is high. To silence the alarm, press Alarm Reset on the control panel. The High Temp will continue to be displayed on the control panel until set temperature has been restored. The alarm will sound again if the temperature is not restored and remains high in six hours. Turbo Freeze To enable Turbo Freeze, press Turbo Freeze until 7XUER)UHH]HON light turns on. The unit will be in ³7XUER)UHH]H´PRGHIRUKRXUVDQGWKHON light for 7XUER)UHH]HZLOOVWD\LOOXPLQDWHG$IWHUWKHKRXUVLV completed, Turbo Freeze turns off automatically. The ON light will be off to show that Turbo Freeze is off. To exit Turbo FreezeEHIRUHWKHKRXUDXWRPDWLFVKXWRII SUHVV7XUER)UHH]HXQWLOONOLJKWIRU7XUER)UHH]HLVRII Control Lock To lock the controls, press Control Lock and hold for 3 seconds until the ON light for Control Lock turns on. To unlock, press and hold Control Lock for 3 seconds. The ON light for Control Lock turns off and the control panel will be unlocked. Control setting cannot be changed when the control is locked. Power Fail If a power outage has caused the internal temperature to be high, the high temp alarm will sound and the temperature display will flash. Pressing Alarm Reset on the control will silence the alarm and stop the flashing, but High Temp/('ZLOOVWD\RQXQWLO\RXUIUHH]HU reaches a safe storage temperature. If the internal temperature has been restored before you press Alarm Reset, the sound alarm will stop on its own, DQGWKH+LJK7HPS/('ZLOOJRRIIDXWRPDWLFDOO\7KH temperature display will continuing flashing to remind you that a power outage has occurred. Press Alarm Reset to stop the flashing. Door Open Alarm If your door has been left open for more than 2 minutes, the control panel will display Door Open and will sound DQDODUPXQWLOWKHGRRUKDVEHHQFORVHGRU'RRU2SHQ is pressed on the control panel. If Door Open has been pressed but the door has not been closed, Door Open will continue to be displayed on the control panel until the door has been closed. If 10 minutes after Door Open has been pressed, the door is still open, the door open alarm will sound again. C or F Setting 7RFKDQJHEHWZHHQ&ƒRU)ƒSUHVVDQGKROGWKHDQG pads at the same time for 3 seconds. Control Dormant The control settings are displayed at normal condition. Press and hold Control Lock and Turbo Freeze for VHFRQGV7KHHOHFWULFFRQWUROZLOOHQWHULQWR'RUPDQW Mode and will not show the control settings. The control settings will be displayed for 30 seconds if one of the buttons on the control is pressed or the door is opened ZKLOHLQ'RUPDQW0RGH3UHVVDQGKROGControl Lock and Turbo Freeze for 3 seconds again will disable 'RUPDQW0RGH 6 49-60763-1