GE G2 User Manual (English for G2) - Page 86
Connecting the camera and printer.
View all GE G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Connecting the camera and printer. 1. Make sure both the camera and printer are turned on. 2. Connect one end of the supplied USB cable to the USB port on your camera. 3. Connect the other end of the cable to the USB port on the printer. If the camera is not connected to a PictBridge compatible printer, the following error message appears on the LCD screen. The above error message would also appear if the USB mode were set incorrectly, in which case you should disconnect the USB cable, check the USB mode settings, ensure that the Printer is turned on, and then try connecting the USB cable again. 82
¹³
Connecting the camera and printer.
1. Make sure both the camera and printer are turned
on.
2. Connect one end of the supplied USB cable to the
USB port on your camera.
3. Connect the other end of the cable to the USB port
on the printer.
If the camera is not connected to a PictBridge
compatible printer, the following error message
appears on the LCD screen.
The above error message would also
appear if the USB mode were set
incorrectly, in which case you should
disconnect the USB cable, check the USB
mode settings, ensure that the Printer is
turned on, and then try connecting the USB
cable again.