GE G5WP User Manual (English (5.17 MB)) - Page 4
Precautions of Waterproof Funciton - test
UPC - 810027015938
View all GE G5WP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Precautions of Waterproof Funciton Water & Dust Proof • The camera has JIS/IEC waterproof grade 8 (IPX8) and JIS/IEC dustproof grade 6 (IPX6). (It is tested according to GE testing condition, but no guarantee to say there is no damage or failure happened at all). • The accessories included with the camera have no waterproof function. Precautions Before Using 1. Please make sure that the battery cover is locked tightly. 2. Waterproof rubber and its contact surface shouldn't have scratch or foreign material between them. 3. Waterproof rubber with scratch shouldn't be used in water. 4. Neither open and close the battery cover when you are close to water and sea, nor do that by wet hands. 5. Do not use the camera in a thermal spring. 6. In water camera may sink down. A wrist strap and similar objects can let the camera not sink. Precautions When Using 1. Don't use the camera below 5 meters underwater. 2. Don't use the camera underwater more than 2 hours. 3. Don't jump into water suddenly. The battery cover may be opened after the camera is impacted. 4. Don't open the battery cover underwater. 5. When the camera is under strong vibration, pressure or impact, please go to the sales point or our company's service site for consultation. Maintenance Precautions After Using 1. Don't open the battery cover after water falls into the camera. In this case, wipe out the camera with a clean and dry clothing without loose fiber. 2. When the battery cover is opened, there may be water drops in the internal of battery cover and on the contact surface of camera body, please make sure to dry it out. 3. After using the camera in the water (including sea water) or places with sands, mud and other foreign materials, put it into container with clean water for cleaning as earlier as you can. After cleaning, wipe out the camera with a clean and dry clothing without loose fiber, then confirm if the bottons and other function still can work normally. 4. If there are dusts, sands and other foreign materials mixed with the waterproof rubber and its contact surface, please wipe it out with a clean and dry clothing without loose fiber. 5. Don't use chemical agent during maintenance. And, silicone grease can't be coated on the waterproof rubber. 6. When it is stored, do not interfuse any sands and other foreign materials on the waterproof rubber and its contact surface. Waterproof rubber with scratches and cracks is potential to introduce water into camera. In this case, please go to the sales point or our company's service site for repairing or requesting to replac it with a new waterproof rubber. iii