GE GBSC3HBXWW Use and Care Manual - Page 24
REVERSING THE DOOR SWING, Installation Instructions, cont., TRANSFER CENTER HINGE, BRACKET
UPC - 084691175223
View all GE GBSC3HBXWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installation Instructions REVERSING THE DOOR SWING (cont.) 2 REMOVE THE FREEZER DOOR A Tape the door shut with masking tape. B Remove hinge pin from hinge bracket. This will be used again with the new hinge bracket for the other side. 3 TRANSFER CENTER HINGE BRACKET (cont.) B Transfer the plug button and screw hole cover in the hinge holes on the left side to the right side. C Remove the tape and tilt the door away from the cabinet. Lift the door off the bottom hinge pin. D Remove the button plug from the left side of the door. Remove the door thimble from the right side of the door. Install the door thimble into the hole on the left and the button plug into the hole on the right. E Set the door on a non-scratching surface, with the inside up. 3 TRANSFER CENTER HINGE BRACKET A Using a 5/16″ socket ratchet/driver, remove the bolts securing the center hinge to the cabinet. C Install the new center hinge bracket from the kit on the left side. 4 REMOVE BOTTOM HINGE AND LEVELING LEG A Using a 1/2″ socket ratchet/driver, remove the nut and hinge pin from the hinge bracket with leveling leg. Using a 5/16″ socket ratchet/driver, remove the screws from the bottom hinge bracket. These will be reinstalled on the other side. Bottom Hinge Bracket B Using a 5/16″ socket ratchet/driver, remove the screws from the leveling leg bracket on the other side. These will be reinstalled on the opposite side. Leveling Leg Bracket 24