GE GBSL0HCXLLS Use and Care Manual - Page 20
Installation Instructions, REMOVING THE FREEZER DRAWER, REMOVE THE BASE GRILLE, REMOVE THE BASKET
UPC - 084691204824
View all GE GBSL0HCXLLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installation Instructions REMOVING THE FREEZER DRAWER (on some models) The freezer drawer can be removed, if needed, to fit through tight areas. Read these instructions completely and carefully. 1 REMOVE THE BASKET A Open the freezer drawer until it stops. B The freezer basket rests on a frame inside the freezer drawer. Lift the basket up at the back. C Lift the front up and lift the entire basket up and out of the drawer. 2 REMOVE THE DRAWER FRONT (cont.) B Lift up on both sides of the freezer drawer handle to separate the drawer railings from the rail assemblies. C Set the drawer front on a non-scratching surface. D Push the rail assemblies back into locking position. A 2 REMOVE THE DRAWER FRONT A Remove the screw on each side of the railing. Rail Assembly Drawer Assembly 3 REMOVE THE BASE GRILLE (if needed) If, after removing the freezer drawer and refrigerator door, the refrigerator will still not fit through a doorway, the base grille can be removed. A Remove the base grille by removing the screws. Screw 20