GE GDF610PMJES Use and Care Manual - Page 12

Care and cleaning. - appliances

Page 12 highlights

Care and cleaning. Cleaning the Exterior Door Panel Before cleaning the front panel, make sure you know what type of panel you have. Refer to the last two letters of your model number. You can locate your model number on the left-hand tub wall just inside the door. If your model number ends with BB, CC, WW, SA or ES then you have a painted door panel. If your model number ends with SS, then you have a Stainless Steel door panel. If your model number ends with II, then you have an Integrated door panel. Follow the instructions below for cleaning the door panel for your specific model. Painted Door Panel (model numbers ending in BB-black, CC-bisque, WW-white, SA-silver or ES-slate) Use a clean, soft, lightly dampened cloth, then dry thoroughly. You may also use a good appliance wax or polish. Do not use scouring pads or powered cleaners because these products can scratch the finish. Stainless Steel Door Panel (model numbers ending in SS) For cleaning rust and tarnish, cleaners with oxalic acid such as Bar Keepers Friend Soft Cleanser™ will remove rust, tarnish and small blemishes. Use only a liquid cleanser free of grit and rub in the direction of the brush lines with a damp soft sponge. Do not use appliance wax or polish on the stainless steel. For other blemishes and marks, use Stainless Steel Magic or a similar product using a clean soft cloth. Do not use appliance wax, polish, bleach or products containing chlorine on Stainless Steel. You can order Stainless Steel Magic™ # WX10X29 through GE Parts by calling 877.959.8688. In Canada, call 1-800661-1616. Integrated Door Panel (model numbers ending in II) This is a custom installed door panel, and you will need to refer to the cabinet manufacturers recommendations for proper cleaning. Cleaning the Control Panel To clean the control panel, use a lightly dampened cloth. Then dry thoroughly. Cleaning the Dishwasher Interior To clean and de-odorize your dishwasher, use citric acid or Lemi Shine®*, a detergent additive. Lemi Shine will break up mineral deposits, and remove hard water film and stains. You can order citric acid #WD35X151 through GE Parts by calling 877-959-8688 or visiting GEApplianceparts.com. In Canada, call 1-800-661-1616. You can purchase Lemi Shine at your local grocery store or by calling GE at the numbers above and ask for WX10X10019. Stainless Steel Inner Door The stainless steel used to make the dishwasher inner door provides the highest reliability available in a GE dishwasher. If the dishwasher inner door should be scratched or dented during normal use, it will not rust or corrode. These surface blemishes will not affect its function or durability. 12 * Lemi Shine® is a registered trademark of Envirocon Technologies, Inc.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

12
Care and cleaning.
Cleaning the Control Panel
To clean the control panel, use a lightly
dampened cloth. Then dry thoroughly.
Stainless Steel Inner Door
The stainless steel used to make the dishwasher
inner door provides the highest reliability
available in a GE dishwasher.
If the dishwasher inner door should be
scratched or dented during normal use, it will
not rust or corrode. These surface blemishes
will not affect its function or durability.
Cleaning the Dishwasher Interior
Cleaning the Exterior Door Panel
Before cleaning the front panel, make sure you
know what type of panel you have. Refer to the
last two letters of your model number. You can
locate your model number on the left-hand tub
wall just inside the door. If your model number
ends with BB, CC, WW, SA or ES then you have
a painted door panel. If your model number
ends with SS, then you have a Stainless Steel
door panel. If your model number ends with II,
then you have an Integrated door panel.
Follow the instructions below for cleaning the
door panel for your specific model.
Painted Door Panel
(model numbers ending in
BB–black, CC–bisque, WW–white, SA-silver or
ES-slate)
Use a clean, soft, lightly dampened cloth, then
dry thoroughly. You may also use a good
appliance wax or polish.
Do not use scouring pads or powered
cleaners because these products can scratch
the finish.
Stainless Steel Door Panel
(model numbers
ending in SS)
For cleaning rust and tarnish,
cleaners with
oxalic acid such as Bar Keepers Friend Soft
Cleanser™ will remove rust, tarnish and small
blemishes. Use only a liquid cleanser free
of grit and rub in the direction of the brush
lines with a damp soft sponge. Do not use
appliance wax or polish on the stainless steel.
For other blemishes and marks,
use Stainless
Steel Magic or a similar product using a clean
soft cloth.
Do not use appliance wax, polish,
bleach or products containing chlorine on
Stainless Steel.
You can order Stainless Steel
Magic™ # WX10X29 through
GE Parts by
calling 877.959.8688. In Canada, call 1-800-
661-1616.
Integrated Door Panel
(model numbers ending
in II)
This is a custom installed door panel, and you
will need to refer to the cabinet manufacturers
recommendations for proper cleaning.
*
Lemi Shine® is a registered trademark of Envirocon Technologies, Inc.
To clean and de-odorize your dishwasher,
use citric acid or Lemi Shine®*, a detergent
additive. Lemi Shine will break up mineral
deposits, and remove hard water film and
stains. You can order citric acid #WD35X151
through GE Parts by calling 877-959-8688 or
visiting
GEApplianceparts.com
. In Canada,
call 1-800-661-1616.
You can purchase
Lemi Shine at your local grocery store or by
calling GE at the numbers above and ask for
WX10X10019.