GE GDSL0KCXLS Installation Instructions - Page 4
Rehang Refrigerator Door Cont., Rehang Freezer Door, Rehang Refrigerator Door, Install The Logo
UPC - 084691171478
View all GE GDSL0KCXLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Installation Instructions 8 TRANSFER REFRIGERATOR DOOR HANDLE TO RIGHT Refer to Remove the Fresh Food Door Handle and Attach the Fresh Food Door Handle sections for instructions. 9 REHANG FREEZER DOOR (For models with freezer door) A Lower the freezer door onto the bottom hinge pin. Ensure that the plastic hinge pin thimble is on the hinge pin or inside the door hinge pin hole located in the bottom of the door. 10 REHANG REFRIGERATOR DOOR (cont.) B Insert the door thimble into the hinge hole on top of the refrigerator door and then insert the top hinge pin. Make sure the door is aligned with the cabinet. Attach the hinge to the top of the cabinet loosely with the bolts. C Make sure the gasket on the door is flush against the cabinet and is not folded. Support the door on the handle side and make sure the door is straight and the gap between the doors is even across the front. While holding the door in place, tighten the top hinge bolts. Replace the hinge cover. B Straighten the door and line it up with the center hinge bracket. C Install the center hinge pin with a 3/4″ socket ratchet/driver. Turn it until it extends through the hinge bracket and into the freezer door. 11 INSTALL THE LOGO BADGE Remove the adhesive backing paper and align the pins on the back of the badge with the holes in the door. Apply pressure to the badge to ensure it sticks to the door. 10 REHANG REFRIGERATOR DOOR A Lower the refrigerator door onto the center hinge pin. Ensure that the plastic hinge pin thimble is on the center hinge pin or inside door hinge pin hole located in the bottom of the door. 4