GE GDSS0KCXSS Installation Instructions

GE GDSS0KCXSS - 20.2 cu. Ft. Bottom-Freezer Drawer Refrigerator Manual

Get GE GDSS0KCXSS - 20.2 cu. Ft. Bottom-Freezer Drawer Refrigerator PDF manuals and user guides
UPC - 084691171461
View all GE GDSS0KCXSS manuals
Add to My Manuals
Save this manual to your list of manuals

GE GDSS0KCXSS manual content summary:

  • GE GDSS0KCXSS | Installation Instructions - Page 1
    ge.com In Canada, call 1.800.561.3344 or Visit our Website at: www.geappliances.ca IMPORTANT NOTES When reversing the door swing: NOTE: Door swing is not reversible on stainless steel models. • Read the instructions all the way through before starting. • Parts the refrigerator from its electrical
  • GE GDSS0KCXSS | Installation Instructions - Page 2
    THE REFRIGERATOR DOOR (cont.) E Remove the tape and tilt the door away from the cabinet. Lift the door off the center hinge pin. Ensure that the plastic hinge pin thimble remains on the hinge pin or inside door hinge pin hole located in the bottom of the door. 2 REMOVE THE FREEZER DOOR (For models
  • GE GDSS0KCXSS | Installation Instructions - Page 3
    /driver, install the hinge bracket with leveling leg on the left side of the refrigerator. The pin will be toward the outside of the refrigerator. 5 REMOVE BOTTOM HINGE AND LEVELING LEG (For models with freezer door) A Using a 1/2″ socket ratchet/driver, remove the nut and hinge pin from the hinge
  • GE GDSS0KCXSS | Installation Instructions - Page 4
    sections for instructions. 9 REHANG FREEZER DOOR (For models with freezer door) A Lower the freezer door onto the bottom hinge pin. Ensure that the plastic hinge pin thimble is on the hinge pin or inside the door hinge pin hole located in the bottom of the door. 10 REHANG REFRIGERATOR DOOR (cont
  • 1
  • 2
  • 3
  • 4
TOOLS YOU WILL NEED
Thin-blade Screwdriver
Installation
Reversing the
Instructions
Door Swing
(Single Door Refrigerator Models only)
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com
In Canada, call 1.800.561.3344 or Visit our Website at: www.geappliances.ca
1
200D9512P002
31-46127
01-08 JR
IMPORTANT NOTES
When reversing the door swing:
NOTE:
Door swing is not reversible on stainless steel
models.
•
Read the instructions all the way through before
starting.
•
Parts are included in the door hinge kit.
•
Handle parts carefully to avoid scratching paint.
•
Set screws down by their related parts to avoid
using them in the wrong places.
•
Provide a non-scratching work surface for the doors.
IMPORTANT:
Once you begin, do not move the cabinet
until door-swing reversal is completed.
These instructions are for changing the hinges from the
right side to the left side—if you ever want to change
the hinges back to the right side, follow these same
instructions and reverse all references to left and right.
•
Once door swing is finalized, ensure the logo badge is
properly aligned and permanently secured to the door
by removing the adhesive cover on the back side.
NOTE:
A replacement logo badge is included
in the hinge kit.
Unplug the refrigerator from its electrical outlet.
Empty all door shelves, including the dairy
compartment.
Masking Tape
Adjustable Wrench
5/16
″
Socket
Ratchet/Driver
Phillips Screwdriver
Torx T-20 Driver
REMOVE THE REFRIGERATOR DOOR
Tape the door shut with masking tape.
Remove the hinge cover on top of the
refrigerator door by carefully prying it
up with a putty knife, if necessary.
Using a 5/16
″
socket ratchet/driver, remove
the bolts securing the top hinge to the cabinet.
Then lift the hinge straight up to free the hinge
pin from the socket in the top of the door.
Carefully remove the door thimble from inside
the socket. This will be used again when
reinstalling the door on the other side.
1
A
B
C
D
Hinge Cover
Top Hinge
Door Thimble