GE GME04GLKLB Use and Care Manual - Page 8
Door Reversal, on some models
View all GE GME04GLKLB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
,QVWDOODWLRQ,QVWUXFWLRQV WARNING ([SORVLRQ+D]DUG Keep flammable materials and vapors, such as gasoline, away from refrigerator. Failure to do so can result in fire, explosion, or death. &211(&7,1*(/(&75,&,7< WARNING (OHFWULFDO6KRFN+D]DUG Plug into a grounded 3-prong outlet Do not remove the ground prong Do not use an adapter Failure to follow these instructions can result in death, fire, or electrical shock. 32:(5&25' • Plug the refrigerator power cord into its own properly grounded wall outlet with a voltage rating matching that on the refrigerator rating plate. • Do not use an extension cord. • Read all safety precautions on pages 2 and 3. Plug buttons or screws Plug button Spacer Door Reversal (on some models) Hinge cover Hinge Bottom hinge Leveling legs 1. Remove the small plug button on the left side of the door top cap. 2. Remove the 2 plug buttons or screws on the left side on top of the cabinet. 3. Remove the plastic hinge cover by lifting it up by the front edge. 4. Remove the 2 screws from the top hinge. 5. Lift the door up and off the bottom hinge (right side). 6. Tilt the refrigerator cabinet back to remove the left leveling leg. 7. Remove the screws on the bottom hinge (right side) and remove the leveling leg. Move the bottom hinge to the left side and secure it with screws. Re-install the leveling legs. IMPORTANT: The left leg has a spacer or spacer feature that must be moved to the right side leveling leg when the door swing is reversed. 8. Screw the right leveling leg, with the spacer, back in place on the right side. 9. Position the door on the left bottom hinge. With the magnetic gasket holding the door in place, secure the top hinge with screws. 10. Make sure the door is aligned with the refrigerator cabinet before continuing. 11. Replace the hinge cover on top of the hinge. 12. Put the plug button in the hole on the right side of the door cap. 13. Put the 2 plug buttons on the right side on top of the cabinet 8