GE GTS17JBWWW Installation Instructions - Page 13

Installation Instructions 4 REVERSING THE HARDWARE (CONT.) 4.2 Interchange hinge (and the shim glued to it) and screws at top right with screws at top left of cabinet. Do not tighten screws on hinge side at this time. 5 REVERSING THE DOOR HANDLES (CONT.) 5.1 Transfer fresh food door handle (cont.) 5.1.4 With tape-tipped putty knife or thin-blade screwdriver, pry out the plug button from the hinge hole on the left side of the door and insert it into the hole on the opposite side that was vacated by removal of the top hinge. Plug Button Installing the hinge on the left. Installing the hinge on the right. NOTES: • Some hinges have four holes. Which holes you use for installing the hinge depends on which side you install the hinge. • The outer edge of the hinge should be parallel to the edge of the case for correct installation. 5 REVERSING THE DOOR HANDLES 5.1 Transfer fresh food door handle 5.1.1 Remove the handle plug using a tape-tipped putty knife under the edge, and remove the screw underneath. Remove the two screws holding the handle to the top of the door. Top Plug 5.1.5 Pull the plug button from the front of the door and transfer it to the opposite side. Plug Button To reattach the handle on the opposite side. 5.2 Transfer door stop 5.2.1 Move the metal door stop from the right end to the left end. Door Stop Left Side 5.2.2 Move any screws from the left end to the right end. Right Side 5.1.2 Remove the handle. 5.1.3 Remove the screws from the right edge of the door top and insert them into the handle screw holes on the opposite side. Screws for Handle Holes 5.3 Reinstalling the Fresh Food Door Handle 5.3.1 Attach the handle to the right side of the door with screws at the top and under the handle plug. 5.3.2 Reinstall the handle plug. 13